Usado unit en Japón

CHEMICAL IMPEDANCE ANALYZER IM3590

Measurement modes: LCR mode, Continuous measurement mode (LCR mode / Analyzer mode), Analyzer mode (Sweeps with measurement frequency and measurement level, temperature characteristics, equivalent circuit analysi...

IN-CIRCUIT TESTER FA1220-02

• Fabricante: HIOKI E.E

Number of test points: Standard: 0 pins (scanner boards optional) Max. 2048 pins (expandable in blocks of 128 pins)* * The maximum number of active pins for each test type depends on the total number of scanner b...

ADS EVO

• Fabricante: HORIBA, Ltd.

Driving functions: Standard drive traces (emissions, etc) ★Performance test mode Auto/Manual adjust (pedal and shift) Learning mode Warm up mode Constant speed mode Manual mode | Applicable vehicles: MT, AT, CVT,...

UV500

Sample flow: Recommended : 0 - 5 L/MIN 0 – 0.5 l/min for NH4 or H2S | Sample pressure: 0 – 4 Bar (0 - 1 Bar with sampling peristaltic pump) 0 – 0.5 Bar for NH4 or H2S | Sample temperature: 0 °C to 80 °C 0°C to 30...

DIFFERENTIAL PROBE 9322

• Fabricante: HIOKI E.E

Measurement functions: DC mode: Waveform monitor output, DC to 10 MHz ±3 dB AC mode: Detection of power line surge noise, 1 kHz to 10 MHz ±3 dB (Low frequency cut-off frequency 1 kHz ± 300 Hz) RMS mode: Rectifie...

RM-90Specifications

Tare weight display: 4 digits | Weight display: 5 digits | Unit price display: 6 digits | Total price display: 7 digits | Power source: 85V 〜 264VAC, 47 〜 63Hz | Operating temperature: -10℃ 〜 +40℃ | Operating hum...

WIRELESS ADAPTER Z3210

• Fabricante: HIOKI E.E

Operating environment: Indoors, pollution degree 2, operable at an altitude specified in specifications of each measuring instrument to which the adapter is attached | Operating temperature and humidity (storage ...

AC/DC CURRENT SENSOR CT6904A, CT6904A-1

Rated current: 500 A AC/DC | Max. allowable input: Within the derating range, However, up to ±1000 A peak is allowable if within 20 ms. (design value) | Frequency bandwidth: Amplitude: DC to 4 MHz (CT6904A), DC t...

AC/DC CURRENT SENSOR CT6904A-2, CT6904A-3

Rated current: 800 A AC/DC | Max. allowable input: Within the derating range, However, up to ±1200 A peak is allowable if within 20 ms. (design value) | Frequency bandwidth: Amplitude: DC to 4 MHz (CT6904A-2), DC...

HORIBA Advanced Techno Co., Ltd. CS-600F

• Fabricante: Horiba

Measurement principle: Absorption spectroscopic method | Calculation principle: Temperature compensation type multivariate analysis | Measurement target: NH 3 /H 2 O 2 /H 2 O (reperesentative specification) * Ple...

Yamato ADL311S-A

• Fabricante: Yamato

Temp. adjusting unit setting range: 40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature) | Temperature adjusting accuracy: Inlet temperature±1°C | Drying air amount adjusting range: 0 to 0.7m3/min | Sp...

LCR METER IM3523A

Measurement modes: LCR (Measurement with single condition), Continuous testing (Continuous measurement under saved conditions) | Measurement parameters: Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls,...

POWER ANALYZER PW6001

Measurement line type: Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire | Number of input channels: Max. 6 channels; each input unit provides 1 channel for simultaneous voltage and...

MAGNETIC FIELD HiTESTER FT3470-51

Magnetic flux density (bandwidth): 10 Hz to 400 kHz/ 10 Hz to 2 kHz/ 2 kHz to 400 kHz | Exposure level: General public/ Occupational | Display: Single axes X, Y, Z (2000 counts), Composite RMS value R (3464 count...

MEMORY HiCORDER MR8880

• Fabricante: HIOKI E.E

Number of channels: 4 analog channels + 8 logic channels (standard) Note: Isolated analog channels, isolated input and frame, logic has common GND | Measurement ranges (10 div full-scale): 4 channels of voltage m...