Usado torno cnc en sichuan-chugoku

MD 63

Characteristics: MD 63 | Height of centers: 32″ | I turn over the bench: 63″ | Turning on the cross slide: 49″ | Width of the bed: 32″ | Distance between points: 80″ - 320″ | Spindle edge diameter: Ø 9″ (Opt. Ø 1...

HL 37

Characteristics: HL 37 | I turn over the bench: 37.8″ | Turning on the cross slide: 24.2″ | I turn over the neckline: 54-3/8″ | Width of the bed: 24″ | Distance between points: 120″ (Opt 80″ / 160″ / 200″ /240″ /...

HR 35

Characteristics: HR 35 | I turn over the bench: 34.6″ | Turning on the cross slide: 25.2″ | I turn over the neckline: 46″ | Width of the bed: 19″ | Distance between points: 120″ (Opt 80″ / 160″ / 200″). | Cross t...

HW 30

ML 1740T

Characteristics: ML 1740T | I turn over the bench: 17″ | Turning on the cross slide: 11″ | I turn over the neckline: 24.5″ | Width of the bed: 12 ″ | Distance between points: 44″ | Cross travel: 12 ″ | Auxiliary ...

RML 1640T

Characteristics: RML 1640T | I turn over the bench: 16-3/16″ | Turning on the cross slide: 10-3/8″ | I turn over the neckline: 23″ | Width of the bed: 10-1/4″ | Distance between points: 40″ | Cross travel: 8-11/1...

SSM 1340BV

Characteristics: SSM 1340BV | I turn over the bench: 13″ | Turning on the cross slide: 8-1/4″ | I turn over the neckline: 18-1/2″ | Width of the bed: 7 - 1/2″ | Distance between points: 40″ | Cross travel: 6-3/4″...

KLS 1840G

Characteristics: KLS 1840G | I turn over the bench: 18″ | Turning on the cross slide: 10.8″ | I turn over the neckline: 27.2″ | Width of the bed: 12 ″ | Distance between points: 40″ | Cross travel: 11.4″ | Auxili...

KLS 1340A

Characteristics: KLS 1340A | I turn over the bench: 13″ | Turning on the cross slide: 7-1/4″ | I turn over the neckline: 18-3/4″ | Width of the bed: 7 - 3/8″ | Distance between points: 40″ | Cross travel: 6 - 1/2...

CNL 1740

Characteristics: CNL 1740 | I turn over the bench: 17″ | Turning on the cross slide: 10-7/8″ | Distance between points: 37″ | Width of the bed: 12 ″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole through the...

KLR 200

Características: KLR 200 | Diámetro máximo de giro: 13.8 | Longitud máxima de giro: 22.4/39.4 | Husillo agujero pasante: 2.44 | Chuck: 8.26

CHL 21 SERIES

Characteristics: CHL 21 SERIES | I turn over the bench: 20.98″ | Turning on the cross slide: 11.8″ | Distance between points: 33.2″ / 112″ | Width of the bed: 13.58″ | Spindle nose: D1-8 or ASA A2-6 | Hole throug...

KVT 55E

KVR 320X202

Características: KVR 320X202 | Desplazamiento: 60 X 32 X 28 | Velocidad del cabezal: 8000 RPM | Cono del husillo: CT-50 | Tamaño de la mesa: 63 X 28

KLM 200SM

Características: KLM 200SM | husillo secundario: SI | Diámetro máximo de giro: 11.3 | Longitud máxima de giro: 19.5 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secund...