Usado system sensor en Nagano, Prefectura de Nagano, Japón

AC/DC AUTO-ZERO CURRENT SENSOR CT7731

Rated measurement current: 100 A AC/DC | Max. measurement current: 100 A (requires derating at frequency) | Max. allowable peak input: 150 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with CM...

AC/DC AUTO-ZERO CURRENT SENSOR CT7742

Rated measurement current: 2000 A AC/DC | Max. measurement current: 2000 A (requires derating at frequency) | Max. allowable peak input: 2840 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with...

AC/DC AUTO-ZERO CURRENT SENSOR CT7736

Rated measurement current: 600 A AC/DC | Max. measurement current: 600 A (requires derating at frequency) | Max. allowable peak input: 900 A peak | Bandwidth: DC to 5 kHz (-3dB) (When used in combination with CM...

ELECTRODE RESISTANCE MEASUREMENT SYSTEM RM2610

Measurement target: Positive and negative electrode sheets for rechargeable lithium-ion batteries | Measurement parameters: Composite resistivity [Ωcm] Interface resistance (contact resistance) between the compos...

ALDAS-Mini : ELECTROLYSIS CELL ANALYZER

Measurement target: Electrolysis cell, cell stack | Measurement parameters: Impedance ​(R,​X,​θ,​Z)​, voltage ​(V),​ current ​(I) | Measurement modes: Logging mode, Nyquist plot mode, Bode plot mode | Max. input ...

RESISTANCE METER RM3545A

resistance range (13 ranges): [Range, Maximum display value, Resolutions, Testing current (Measurement current) ] 1000 μΩ: 1200.000 μΩ, 1 nΩ, 1 A 10 mΩ: 12.000 00 mΩ, 10 nΩ, 1 A 100 mΩ: 120.000 0 mΩ, 100 nΩ, 1 A...

POWER ANALYZER PW8001

Measurement lines: 1-phase-2-wire, 1-phase-3-wire, 3-phase-3-wire, 3-phase-4-wire | No. of pw8001 input units: Max. 8 units (mix and match) | Type of input unit: U7001 2.5 MS/s INPUT UNIT U7005 15 MS/s INPUT UNIT...

AC/DC CURRENT PROBE CT6844A

Rated current: 500 A AC/DC | Frequency bandwidth: DC to 500 kHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±800 A peak (Within 20 ms in an environment of 40°C/104°F or le...

AC/DC CURRENT PROBE CT6841A

Rated current: 20 A AC/DC | Frequency bandwidth: DC to 2 MHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±60 A peak (Within 20 ms in an environment of 40°C/104°F or less)...

AC/DC CURRENT PROBE CT6843A

Rated current: 200 A AC/DC | Frequency bandwidth: DC to 700 kHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±600 A peak (Within 20 ms in an environment of 40°C/104°F or le...

AC/DC CURRENT PROBE CT6845A

Rated current: 500 A AC/DC | Frequency bandwidth: DC to 200 kHz | Diameter of measurable conductors: Max. φ 50 mm (1.97 in.) | Max. allowable input: ±1500 A peak (Within 20 ms in an environment of 40°C/104°F or ...

CLAMP ON POWER LOGGER PW3360

• Fabricante: HIOKI E.E

Measurement line & number of circuits: 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 c...

CLAMP ON EARTH TESTER FT6380-50

• Fabricante: HIOKI E.E

Measurement principle: Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated Note: For multi groun...

PRECISION DC VOLTMETER DM7276

Dc voltage: 100 mV ( ±120.000 00 mV) to 1000 V ( ±1000.000 0 V ), 5 ranges | Basic accuracy: 10 V range: ±0.0009% rdg. ±12 μV | Temperature: -10.0°C to 60.0°C (14.0°F to 140°F), combined with sensor Z2001: ±0.5°C...

PRECISION DC VOLTMETER DM7275

Dc voltage: 100 mV ( ±120.000 00 mV) to 1000 V ( ±1000.000 0 V ), 5 ranges | Basic accuracy: 10 V range: ±0.0020% rdg. ±12 μV | Temperature: -10.0°C to 60.0°C (14.0°F to 140°F), combined with sensor Z2001: ±0.5°C...