Usado system sensor en Japón

Yamato ST201

• Fabricante: Yamato

System: Automatic high pressure steam sterilizer | Temp. setting range: sterilization: 105 to 123deg.C | Maximum operational pressure: 0.18MPa | Interior material: Stainless steel | Heater: 1.3kW | Temp. controll...

HORIBA Advanced Techno Co., Ltd. HE-200C

• Fabricante: Horiba

Product name: Conductivity meter | Sensors in combination: 2-electrode method conductivity sensor ESH, ESD, ESL, and FS Series sensor of cell constant 0.01/cm,0.1/cm, or 1.0/cm | Temperature: 0.01℃ | Linearity: W...

HORIBA STEC, Co., Ltd. MV-2000

• Fabricante: Horiba

Liquid material: All liquids except those corrosive to stainless steel(ex. HCl, HF) | Setting temperature: By vaporization conditions(Control Valve : Max 140 ˚C Vaporizer : Max 200 ˚C) | Leak integrity: ≤ 1 × 10-...

Yamato CF820

• Fabricante: Yamato

Circulation type: Closed System Circulation By Pump | Operational ambient temperature: 5 deg.C to 35 deg.C | Operating temp. range: -20 deg.C to R.T. | Cooling capacity: Approx. 940W (810kcal/h) at Liquid temp. 1...

RESISTANCE METER RM3545A

resistance range (13 ranges): [Range, Maximum display value, Resolutions, Testing current (Measurement current) ] 1000 μΩ: 1200.000 μΩ, 1 nΩ, 1 A 10 mΩ: 12.000 00 mΩ, 10 nΩ, 1 A 100 mΩ: 120.000 0 mΩ, 100 nΩ, 1 A...

HORIBA Advanced Techno Co., Ltd. HC-200F

• Fabricante: Horiba

Product name: Fluoride ion meter | Electrode used with product: Fluoride ion electrode | Temperature: 0.1℃ | Linearity: Within ±0.08 mA (output only) | Output type: Contact output with voltage (output of connecte...

POWER ANALYZER PW8001

Measurement lines: 1-phase-2-wire, 1-phase-3-wire, 3-phase-3-wire, 3-phase-4-wire | No. of pw8001 input units: Max. 8 units (mix and match) | Type of input unit: U7001 2.5 MS/s INPUT UNIT U7005 15 MS/s INPUT UNIT...

Yamato DP610

• Fabricante: Yamato

Method: Vacuum drying by decompressed chamber direct heating | Max. temp. reaching time: Approx. 100 min. | Interior material: Stainless steel | Exterior material: Cold rolled steel plate with baking coating | Do...

Yamato DP300

• Fabricante: Yamato

Method: Vacuum drying by decompressed chamber direct heating | Max. temp. reaching time: Approx. 120 min. | Interior material: Stainless steel | Exterior material: Cold rolled steel plate with baking coating | Do...

Yamato DP410

• Fabricante: Yamato

Method: Vacuum drying by decompressed chamber direct heating | Max. temp. reaching time: Approx. 80 min. | Interior material: Stainless steel | Exterior material: Cold rolled steel plate with baking coating | Doo...

Yamato DP200

• Fabricante: Yamato

Method: Vacuum drying by decompressed chamber direct heating | Max. temp. reaching time: Approx. 60 min. | Interior material: Stainless steel | Exterior material: Cold rolled steel plate baking coating | Door: Si...

AC/DC CURRENT PROBE CT6843A

Rated current: 200 A AC/DC | Frequency bandwidth: DC to 700 kHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±600 A peak (Within 20 ms in an environment of 40°C/104°F or le...

AC/DC CURRENT PROBE CT6845A

Rated current: 500 A AC/DC | Frequency bandwidth: DC to 200 kHz | Diameter of measurable conductors: Max. φ 50 mm (1.97 in.) | Max. allowable input: ±1500 A peak (Within 20 ms in an environment of 40°C/104°F or ...

AC/DC CURRENT PROBE CT6844A

Rated current: 500 A AC/DC | Frequency bandwidth: DC to 500 kHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±800 A peak (Within 20 ms in an environment of 40°C/104°F or le...

AC/DC CURRENT PROBE CT6841A

Rated current: 20 A AC/DC | Frequency bandwidth: DC to 2 MHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±60 A peak (Within 20 ms in an environment of 40°C/104°F or less)...