Usado system en México

S 1500

Characteristics: S 1500 | Size of the table: 24″ X 73″ | Longitudinal displacement (x-axis): 60″ | Transverse displacement (y-axis): 27″ | Vertical displacement (z-axis): 28″ | Distance from spindle center to col...

CALDERA - HURST HYBRID 200, 300, 600 HP

CHL 21 SERIES

Characteristics: CHL 21 SERIES | I turn over the bench: 20.98″ | Turning on the cross slide: 11.8″ | Distance between points: 33.2″ / 112″ | Width of the bed: 13.58″ | Spindle nose: D1-8 or ASA A2-6 | Hole throug...

CHC 22 SERIES

Characteristics: CHC 22 SERIES | I turn over the bench: 21.7″ | Turning on the cross slide: 11.8″ | Distance between points: 40″ / 60″ / 80″ / 120″ | Width of the bed: 13.58″ | Spindle nose: ASA A2-8 | Hole throu...

CSC 18 SERIES

Characteristics: CSC 18 SERIES | I turn over the bench: 18″ | Turning on the cross slide: 10 " | Distance between points: 38″ / 57″ | Width of the bed: 12 ″ | Spindle nose: ASA A2-6 | Hole through the spindle: 2....

CSM 1440 CNC

KLS 2660N

KLS 1840N

S 2000

NE-VALIENTE - CENTRO DE MAQUINADO CNC - VALIENTE

Spindle: HITECO HSK F63 11KW ATC | Vacuum pump: BECKER 250M3 | Remote control: YES | Loading lift: Optional | Unloading converyor: Optional

CNL 1740

Characteristics: CNL 1740 | I turn over the bench: 17″ | Turning on the cross slide: 10-7/8″ | Distance between points: 37″ | Width of the bed: 12 ″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole through the...

CRL 1640 CNC

SGS-1020AHD

Characteristics: SGS-1020AHD | Longitudinal displacement of the table: 22.2″ | Table traversing: 10.5″ | Working capacity: 10″ x 20″ | Slots t: 1 x 9/16″ | Engine power: 2 HP | Revolutions: 3500 RPM | Stone size:...