Usado source rf en aisurando

IMPEDANCE ANALYZER IM7580A

Measurement modes: LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode | Measurement parameters: Z, Y, θ, Rs (ESR), Rp, X, G, B, Cs, Cp, Ls, Lp, D (tanδ...

IMPEDANCE ANALYZER IM7585

Measurement modes: LCR mode, Analyzer mode (sweeps with measurement frequency and measurement level), Continuous measurement mode | Measurement parameters: Z, Y, θ, Rs (ESR), Rp, X, G, B, Cs, Cp, Ls, Lp, D (tanδ...

IMPEDANCE ANALYZER IM7587

Measurement modes: LCR mode, Analyzer mode (sweeps with measurement frequency and measurement level), Continuous measurement mode | Measurement parameters: Z, Y, θ, Rs (ESR), Rp, X, G, B, Cs, Cp, Ls, Lp, D (tanδ...

IMPEDANCE ANALYZER IM7581

Measurement modes: LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode | Measurement parameters: Z, Y, θ, Rs (ESR), Rp, X, G, B, Cs, Cp, Ls, Lp, D (tanδ...

ARGUS 3D Galvo CO2 Automatic Feeding Laser Machine For Pop Up Wedding Invitation Paper Card Cutter SCM2000 with CCD

• Fabricante: Argus

Perfect Laser PEDB-C30A

• Fabricante: Perfect Laser

300 kHz - 3 GHz, Network Analyzer 網路分析儀

• Fabricante: Agilent - Keysight

3943 Monitoring Receiver

• Fabricante: Ceyear Technologies

Frequency range: 9kHz～8GHz | Rf modulation bandwidth: 20MHz | Carrier 500mhz,at 10khz frequency offset: <-95dBc/Hz | Maximum linear operating input level: -13dBm, 9kHz～30MHz+3dBm, 20MHz~3.6GHz (low distortion mod...

YIHUA-1501DA DC Power Supply

• Fabricante: Guangzhou Yihua Electronic Equipment

ARGUS Reflective Strip Laser Cutting & Marking Machine | High Precision & Custom Solutions from CO2 Laser Factory

• Fabricante: Argus

Superficie máxima de trabajo: 600*600mm (Opcional) | Potencia del láser: 150vatios/250 vatios/350vatios | Consumo de energía: ≤ 5-7kWh | Vida útil: Más de 20000 horas | Velocidad de marcado: ≤7000mm/s | Mesa de t...

Argus 3D Dynamic laser marking machine for Invitation / Greeting Card-Argus Laser

• Fabricante: Argus

Superficie máxima de trabajo: 600*600mm (Opcional) | Potencia del láser: 150vatios/250 vatios/350vatios | Consumo de energía: ≤ 5-7kWh | Vida útil: Más de 20000 horas | Velocidad de marcado: ≤7000mm/ser 20000 hor...

6 GHz, High-Performance Signal Generator 高性能信號產生器

• Fabricante: Agilent - Keysight

SourceMeter (SMU) Instrument with Contact Check/GPIB Interface 電源電表

• Fabricante: Keithley

Argus Heat Transfer Film on Clothes Sportswear Industry Transfer Vinyl Logo Cutter Galvo Co2 Laser Marking Machine SCM2000

• Fabricante: Argus

Max working area: 600*600mm | Laser power: 150watts/250 watts/350watts | Power consumption: ≤ 5-7kWh | Life span: Over 20000 hours | Marking speed: ≤7000mm/s | Worktable: MDF/Strip/Honeycomb worktable | Laser sou...

Argus Sportswear Logo Cutter Transfer Vinyl Galvo Co2 Laser Marking Machine SCM2000

• Fabricante: Argus

Max working area: 600*600mm | Laser power: 150watts/250 watts/350watts | Power consumption: ≤ 5-7kWh | Life span: Over 20000 hours | Marking speed: ≤7000mm/s | Worktable: MDF/Strip/Honeycomb worktable | Laser sou...