Usado software en Nagoya, Prefectura de Aichi, Japón

HORIBA, Ltd. EMIA-Pro

• Fabricante: Horiba

Contents: EMIA-Pro | Required sample amount: 1g ± 0.1g | Typical meas. time: 70 seconds/cycle | Blank accuracy: σ n-1 ≦ 1.0 ppm | Sulfur: σ n-1 ≦ 2.0 ppm or RSD≦1.5% | Operation gas: Nitrogen (Purity; 99.5%, Pres...

HORIBA, Ltd. EMIA-Expert

• Fabricante: Horiba

Contents: EMIA-Expert | Required sample amount: 1g ± 0.1g | Typical meas. time: 70 seconds/cycle | Blank accuracy: σ n-1 ≦ 0.3 ppm | Sulfur: σ n-1 ≦ 0.3 ppm(less than 20 ppm) σ n-1 ≦ 1.0 ppm or RSD≦0.75...

HORIBA, Ltd. XGT-9000

• Fabricante: Horiba

Instrument: X-ray analytical microscope | Principle: Energy dispersive X-ray fluorescence spectroscopy | Available chamber size: 450 mm (W) x 500 mm (D) x 80 mm (H) | Maximum mass of sample: 1 kg | Maximum mappin...

HORIBA France SAS Ultima Expert LT

• Fabricante: Horiba

Generator: Solid state, 40.68 MHz, water-cooled | Torch: Fully demountable torch, 3 mm internal diameter alumina injector, glass inner and outer tubes | Sample introduction: Concentric glass nebulizer and glass c...

HORIBA France SAS Ultima Expert

• Fabricante: Horiba

Generator: Solid state, 40.68 MHz, water-cooled | Torch: Fully demountable torch, 3 mm internal diameter alumina injector, glass inner and outer tubes | Sample introduction: Concentric glass nebulizer and glass c...

HORIBA, Ltd. CEMS

• Fabricante: Horiba

EXFM-ONE

• Fabricante: HORIBA, Ltd.

SPARC Engine

• Fabricante: HORIBA Europe GmbH