Usado sensor en Nagano, Prefectura de Nagano, Japón

AC/DC CURRENT PROBE CT6843A

Rated current: 200 A AC/DC | Frequency bandwidth: DC to 700 kHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±600 A peak (Within 20 ms in an environment of 40°C/104°F or le...

AC/DC CURRENT PROBE CT6845A

Rated current: 500 A AC/DC | Frequency bandwidth: DC to 200 kHz | Diameter of measurable conductors: Max. φ 50 mm (1.97 in.) | Max. allowable input: ±1500 A peak (Within 20 ms in an environment of 40°C/104°F or ...

AC/DC CURRENT PROBE CT6846A

Rated current: 1000 A AC/DC | Frequency bandwidth: DC to 100 kHz | Diameter of measurable conductors: Max. φ 50 mm (1.97 in.) | Max. allowable input: ±1900 Apeak (Within 20 ms in an environment of 40°C/104°F or l...

POWER ANALYZER PW8001

Measurement lines: 1-phase-2-wire, 1-phase-3-wire, 3-phase-3-wire, 3-phase-4-wire | No. of pw8001 input units: Max. 8 units (mix and match) | Type of input unit: U7001 2.5 MS/s INPUT UNIT U7005 15 MS/s INPUT UNIT...

AC/DC CURRENT PROBE CT6841A

Rated current: 20 A AC/DC | Frequency bandwidth: DC to 2 MHz | Diameter of measurable conductors: Max. φ 20 mm (0.79 in.) | Max. allowable input: ±60 A peak (Within 20 ms in an environment of 40°C/104°F or less)...

RESISTANCE METER RM3544

Resistance range: 30 mΩ (35.000 mΩ display max., 1 µΩ resolution) to 3 MΩ range (3.5000 MΩ display max., 100 Ω resolution), 9 steps Measurement accuracy: ±0.020 % rdg. ±0.007 % f.s. | Testing current: [at 30 mΩ r...

LUX METER FT3424

Standards: DIN 5032-7: 1985 class B, JIS C 1609-1: 2006 general AA class | Light receiving element: Silicon photo diode | Range selection: Auto/ Manual | Linearity: ±2% rdg. (Multiply by 1.5 for display values i...

LUX METER FT3425

Standards: DIN 5032-7: 1985 class B, JIS C 1609-1: 2006 general AA class | Light receiving element: Silicon photo diode | Range selection: Auto/ Manual | Linearity: ±2% rdg. (Multiply by 1.5 for display values i...

DIFFERENTIAL PROBE 9322

• Fabricante: HIOKI E.E

Measurement functions: DC mode: Waveform monitor output, DC to 10 MHz ±3 dB AC mode: Detection of power line surge noise, 1 kHz to 10 MHz ±3 dB (Low frequency cut-off frequency 1 kHz ± 300 Hz) RMS mode: Rectifie...

POWER ANALYZER PW3390

Measurement line type: Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire, Voltage 4 channels, Current 4 channels, Isolated between each channel | Measurement items: Frequency, RMS v...

EARTH TESTER FT6041

• Fabricante: HIOKI E.E

measurement parameters: • Ground resistance measurement: 4-pole method, 3-pole method, 2-pole method, MEC function, clamp-on measurement (two clamps) • Soil resistivity measurement: 4-pole method • Low-resistanc...

AC CLAMP METER CM3289

Ac current range: 42.00 to 1000 A, 3 ranges (40 Hz to 1 kHz, True RMS), Basic accuracy: ±1.5 % rdg. ±5 dgt. | Dc voltage range: 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. | Ac voltage rang...

AC CLAMP METER CM3281

Ac current range: 42.00 to 2000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy 50-60 Hz: ±1.5% rdg. ±5 dgt. | Dc voltage range: 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (...

CLAMP ON PROBE 9132-50

Rated current: 20 A to 1000 A AC, 6 ranges | Accuracy: ±3 % rdg. ±0.2 % f.s. (45 to 66 Hz) | Frequency characteristics: Add to amplitude accuracy for frequencies from 40 to 1 kHz: ± 1 % rdg. | Output rate: 0.2 V ...

DIGITAL MULTIMETER DT4255

Dc voltage range: 600.0 mV to 1000 V 5 ranges, Basic accuracy: ±0.3 % rdg. ±3 dgt. | Ac voltage range: 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz to 1 kHz Basic accuracy 40 - 500 Hz : ±0.9 % rd...