Usado rectifier en mie

COMMON RECTIFIER SIMOVERT P SIEMENS 6SE7033-8EE85-0AA0-Z

• Fabricante: Siemens
• Modelo: 6SE7033

Bernardo Taladro - fresador FM 40 HSV

• Fabricante: Bernardo
• Modelo: FM 40
• Diámetro de perforación: 32 mm

Capacidad de taladro en acero: 32 mm | Capacidad de taladro en fundición: 40 mm | Fresa de planear máx.: 80 mm | Distancia entre columna y portabrocas: 255 mm | Velocidad de rotación de la broca: (12) 75 - 3200 r...

AC CLAMP METER CM3281

Ac current range: 42.00 to 2000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy 50-60 Hz: ±1.5% rdg. ±5 dgt. | Dc voltage range: 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (...

INSULATION TESTER IR4059

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range mω: ±2 % rdg. ±2 dgt. 0.200 - 10.00 | Lower limit resistance: 0.05 MΩ | Overload protection: 600...

AUTOMATIC INSULATION / WITHSTANDING HiTESTER 3153

Functions: Program up to 32 files of 50 step test settings. 10 sets each of dielectric strength and insulation test settings, hold, buzzer | Monitor functions: Output voltage, detected current, measured resistanc...

INSULATION TESTER IR4057-50

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range mω: ±2 % rdg. ±2 dgt. 0.200 - 10.00 | Lower limit resistance: 0.05 MΩ | Overload protection: 600...

INSULATION TESTER IR4056

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range mω: ±2 % rdg. ±2 dgt. 0.200 - 10.00 | Lower limit resistance: 0.05 MΩ | Overload protection: 600...

AIDA NC2-1100; NC2-1600; NC2-2000; NC2-2500

• Fabricante: Aida
• Modelo: NC2-1100

Variante: (1); (2); (1); (2); (1); (2); (1); (2) | Capacidad (kn): 1100; 1600; 2000; 2500 | Longitud de golpe (mm): 110; 180; 130; 200; 150; 250; 170; 280 | Golpes por minuto (min-1): 50÷100; 35÷65; 40÷85; 30÷55;...

AIDA NC1-2000; NC1-2500

• Fabricante: Aida
• Modelo: NC1-2000

Variante: (1); (2); (2) | Capacidad (kn): 2000; 2500 | Longitud de golpe (mm): 160; 250; 300 | Golpes por minuto (min -1): 90÷150; 55÷105; 85÷175; 65÷130; 50÷95; 80÷165; 60÷120; 45÷85 | Altura de matriz (mm): 410...

AIDA NS1-800; NS1-1100; NS1-1500; NS1-2000

• Fabricante: Aida
• Modelo: NS1-2000

Variante: (S); (1); (S); (1); (S); (1); (S); (1) | Capacidad (kn): 800; 1100; 1500; 2000 | Longitud de golpe (mm): 60; 100; 70; 110; 80; 130; 95; 160 | Golpes por minuto (min-1): 75÷150; 55÷125; 65÷135; 50÷110; 5...

Cemsa ER 125 DC SP

• Fabricante: Cemsa

DIFFERENTIAL PROBE 9322

• Fabricante: HIOKI E.E

Measurement functions: DC mode: Waveform monitor output, DC to 10 MHz ±3 dB AC mode: Detection of power line surge noise, 1 kHz to 10 MHz ±3 dB (Low frequency cut-off frequency 1 kHz ± 300 Hz) RMS mode: Rectifie...

Three phase rectifier

Large type stabilized rectifier for electrolytic gold refining

• Fabricante: FIOA International

Large type stabilized rectifier for ag and au electrolytic refining

• Fabricante: FIOA International