Usado rectifier en chiri

CLAMP ON AC/DC HiTESTER 3288

Dc current range: 100.0/ 1000 A, Basic accuracy: ±1.5 % rdg. ±5 dgt. | Ac current range: 100.0/ 1000 A, (10 Hz to 500 Hz, Average rectified), Basic accuracy: ±1.5 % rdg. ±5 dgt. | Dc voltage range: 419.9 mV to 6...

AC CLAMP METER 3280-10F

Ac current range: 41.99 to 1000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy: ±1.5 % rdg. ±5 dgt. | Dc voltage range: 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. | Ac volt...

AC CLAMP METER CM3281

Ac current range: 42.00 to 2000 A, 3 ranges (50 Hz to 60 Hz, Average rectified), Basic accuracy 50-60 Hz: ±1.5% rdg. ±5 dgt. | Dc voltage range: 420.0 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (...

INSULATION TESTER IR4059

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range mω: ±2 % rdg. ±2 dgt. 0.200 - 10.00 | Lower limit resistance: 0.05 MΩ | Overload protection: 600...

AUTOMATIC INSULATION / WITHSTANDING HiTESTER 3153

Functions: Program up to 32 files of 50 step test settings. 10 sets each of dielectric strength and insulation test settings, hold, buzzer | Monitor functions: Output voltage, detected current, measured resistanc...

AC AUTOMATIC INSULATION/WITHSTANDING HiTESTER 3174

Testing voltage: 500 V DC, 1000 V DC | Voltage setting: Digital setting, Setting resolution: 0.01 kV | Waveform/frequency: Sine wave (Distortion ratio 5 % or less at no load), 50/60 Hz selectable | Current measur...

CARD HiTESTER 3244-60

Dc voltage range: 419.9 mV to 500 V, 5 ranges, Basic accuracy: ±0.7 % rdg. ±4 dgt. | Ac voltage range: 4.199 V to 500 V, 4 ranges, Basic accuracy 50 - 500 Hz : ±2.3 % rdg. ±8 dgt. (Average rectified) | Resistanc...

PENCIL HiTESTER 3246-60

Dc voltage range: 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.3 % rdg. ±4 dgt. | Ac voltage range: 4.199 V to 600 V, 4 ranges, Basic accuracy 50 - 500 Hz : ±2.3 % rdg. ±8 dgt. (Average rectified) | Resistance...

AIDA NC2-1100; NC2-1600; NC2-2000; NC2-2500

• Fabricante: Aida
• Modelo: NC2-1100

Variante: (1); (2); (1); (2); (1); (2); (1); (2) | Capacidad (kn): 1100; 1600; 2000; 2500 | Longitud de golpe (mm): 110; 180; 130; 200; 150; 250; 170; 280 | Golpes por minuto (min-1): 50÷100; 35÷65; 40÷85; 30÷55;...

AIDA NC1-2000; NC1-2500

• Fabricante: Aida
• Modelo: NC1-2000

Variante: (1); (2); (2) | Capacidad (kn): 2000; 2500 | Longitud de golpe (mm): 160; 250; 300 | Golpes por minuto (min -1): 90÷150; 55÷105; 85÷175; 65÷130; 50÷95; 80÷165; 60÷120; 45÷85 | Altura de matriz (mm): 410...

AIDA NS1-800; NS1-1100; NS1-1500; NS1-2000

• Fabricante: Aida
• Modelo: NS1-2000

Variante: (S); (1); (S); (1); (S); (1); (S); (1) | Capacidad (kn): 800; 1100; 1500; 2000 | Longitud de golpe (mm): 60; 100; 70; 110; 80; 130; 95; 160 | Golpes por minuto (min-1): 75÷150; 55÷125; 65÷135; 50÷110; 5...

HiTESTER 3030-10

Dc voltage range: 0.3 V (16.7 kΩ/V), 3/12/30/120/300/600 V (20 kΩ/V) Accuracy: ±2.5 % f.s. Max. rated voltage: 600 V | Ac voltage range: 12 V (9 kΩ/V) Accuracy: ±4 % f.s. 30/120/300/600 V (9 kΩ/V) Accuracy: ±2.5 ...

Cemsa ER 125 DC SP

• Fabricante: Cemsa

Rectifier SF410

Skimmer for oil frying machine

Number: NAME | 1: capacitance | 2: charging thyristor | 3: Discharge SCR | 4: rectifier diode | 5: Current limiting resistor | 6: capacitance | 7: charging contactor | 8: charging control board | 9: Discharge con...