Building Filters
- $850 USDPico Rivera, California
- Vendedor de confianza
Scotchman 9012-24M #2258
- Fabricante: Scotchman
- Modelo: 9012-24M
Punching capacity: 90 Ton, 1 1/8″ in 1″ | Special tooling: 4″ Max. Diameter | Throat depth: 12″ | Flat bar shear: 24″ Length, 1″ x 8″, 3/4″ x 12″, 1/2″ x 16″, 1/4″ x 24″ | @ 90°: 6″ x 6″ x 1/2″ | @ 45°: 3″ x 3″ x...
Baltimore, Maryland - Vendedor de confianza
Scotchman 50514 EC #7931
- Fabricante: Scotchman
Punching capacity: 50 Ton – 1 1/4″ in 1/2″, 13/16″ in 3/4″ | Special tooling: 2 1/4″ Max. Diameter | Throat depth: 6″ | @ 90°: 4″ x 4″ x 3/8″ | @ 45°: 2″ x 2″ x 3/8″ | Flat bar shear: 14″ (with 4-Way Reversible B...
Baltimore, Maryland - Vendedor de confianza
Scotchman DO 8514-20M #7932
- Fabricante: Scotchman
- Modelo: DO 8514-20M
If you are looking for a fully-integrated/dual operator ironworker that has more versatility than any other machine on the market, look no more! the scotchman do 8514-20m hydraulic ironworker has five built-in fu...
Baltimore, Maryland - Vendedor de confianza
Scotchman DO 95/140-24M #7934
- Fabricante: Scotchman
- Modelo: DO 95140-24M
The two main features that set scotchman’s dual operator ironworkers apart from others are: 1) On all non-Scotchman dual operator models, the punch station must be used as one of the two functions. On the Scotchm...
Baltimore, Maryland - Vendedor de confianza
Scotchman DO 70/110-24M #7933
- Fabricante: Scotchman
- Modelo: DO 70110-24M
The two main features that set scotchman’s dual operator ironworkers apart from others are: 1) On all non-Scotchman dual operator models, the punch station must be used as one of the two functions. On the Scotchm...
Baltimore, Maryland - Vendedor de confianza
SCOTCHMAN DO 70/110-24M #84852
- Fabricante: Scotchman
- Modelo: DO 70110-24M
# – single phase motor, 10 hp 220 volt/ 60 hz: $ 3,400.00 | #033264 – laser light - bar shear (factory installation): $ 1,235.00 | #026765 – punch extension table: $ 320.00 | #029291...
Ames, Iowa 
Cable tray roll forming machine in the USA
Component: Details | Material: Mild Steel, Galvanized Steel, Aluminum, Stainless Steel | Material thickness: 0.8 mm to 2.5 mm | Material width: Up to 600 mm | Rollers material: GCr15 steel with heat treatment | R...
Estados Unidos
Snap lock roofing roll forming machine Australia
Roller materials: High-grade GCr15 steel with hard chrome coating for durability and precision. | Punching and notching: Automated hydraulic punching and notching systems for profile customization. | Servo motors...
Austin, Texas
Ceiling T grid roll forming machine in the USA
Precision: Accurate dimensions and shapes for consistent quality. | Efficiency: High-speed production to meet large-scale requirements. | Customization: Ability to create different T-grid sizes and styles based o...
Estados Unidos
Door Slat Roll Forming Machine In Georgia, USA
Automated operation: Ensures consistent quality and reduces manual labor. | High precision rollers: Deliver accurate slat profiles with smooth edges. | Hydraulic cutting system: Enables precise cutting without de...
Estados Unidos- Vendedor de confianza
Scotchman DO 8514-20M Made in the USA
- Fabricante: Scotchman
One round punch & die: max. diameter 1-1/4" | Built-in rectangle notcher: 2" x 4" x 1/2" can be converted to 3" x 3" V-notcher, | Rod shear: 1/2", 3/4", 1", 1-1/2" round and 1-1/2" square | Punching capacity: 85 ...
Harrison, Nueva Jersey - Vendedor de confianza
Scotchman DO 120/200-24M Made in the USA
- Fabricante: Scotchman
One round punch & die: max. diameter 1-1/4" | Angle shear capacity @ 90 degrees: 6" x 6" x 1/2" | Punching capacity: 120 ton (108 mt) | Special tooling: 4" max. dia. (100 mm max. dia.) | Throat depth: 12" (300 mm...
Harrison, Nueva Jersey - Vendedor de confianza
SCOTCHMAN 5014-ET #84347
- Fabricante: Scotchman
- Modelo: 5014-ET
Punching capacity: 50 TON, 1 1/4 in -1/2 in , 13/16 in -3/4 in | Special tooling: 2 1/4 in MAX. DIA. | Throat depth: 4 inches | Flat bar shear: 14 inch LENGTH, 3/4 inch X 4 inch, 1/2 inch X 8 inch, 3/8 inch X 10 ...
Ames, Iowa 
Highway guardrail roll forming machine USA
Component: Specification | Roller material: GCr15 steel with heat treatment for wear resistance | Frame size: Heavy-duty welded structure | Motor: High-power motors ranging from 22 kW to 45 kW, depending on model...
Estados Unidos
