Usado parallel en chiri

SM 100 Cutting Mill

Applications: size reduction by cutting | Feed material: soft, medium-hard, elastic, fibrous | Size reduction principle: shearing, cutting | Material feed size*: < 60 x 80 mm | Final fineness*: 0.25 – 20 mm | Spe...

Agilent/Keysight 8595E

• Fabricante: Agilent - Keysight
• Modelo: 8595E

163: GSM900/DCS1800 FIRMWARE FOR OPTION 151 | 010: TRACKING GENERATOR | 041: HP-IB Interface and Parallel Printer Interface | 016: SOFT YELLOW CARRYING/OPERATING CASE | 103: QUASI-PEAK DETECTOR, AM/FM DEMODULATOR...

Horizon Book Block Making System: BBS_56

• Fabricante: Horizon

Roll size: Roll Paper Width : Max. 584.2 mm or 23.00” Min. 218.0 mm or 8.60”Roll Outer Diameter : Max. 1,270 mm or 50” Min. 150 mm or 5.91”Roll Weight : Max. 750 kg or 1,652.0 lb | Sheet weight range: Normal Pape...

SM 200 Cutting Mill

Applications: size reduction by cutting | Feed material: soft, medium-hard, tough, elastic, fibrous | Size reduction principle: shearing, cutting | Material feed size*: < 60 x 80 mm | Final fineness*: 0.25 – 20 m...

Agilent/Keysight 37718C

• Fabricante: Agilent - Keysight
• Modelo: 37718C

106: Dual wavelength 1310 nm and 1550 nm Optical Interface | 200: Adds jitter Tx/Rx capability | 210: Adds optimized jitter receiver intrinsics; requires option 200 be installed. | 300: ATM payloads; requires opt...

Agilent/Keysight 8920B

• Fabricante: Agilent - Keysight
• Modelo: 8920B

031: DELETE HANDLE AND COVER | 055: Mechanical attenuator input option (Standard on 8920B before 2000) | As-is: Unit Sold AS-IS | 001: HIGH STABILITY TIME BASE | 006: 50 uW TO 10W POWER MEASUREMENT RANGE | 010: 4...

Agilent/Keysight 37718B

• Fabricante: Agilent - Keysight
• Modelo: 37718B

210: Adds optimized jitter receiver intrinsics; requires option 200 be installed. | 300: ATM payloads; requires option 355 be installed. | 106: Dual wavelength 1310 nm and 1550 nm Optical Interface | 200: Adds ji...

Agilent/Keysight 37907A

• Fabricante: Agilent - Keysight
• Modelo: 37907A

Number of lim slots available: 2 | Processing capacity: Up to 32 duplex signaling links (64 kb/s at 1 erlang) | Telephone handset connector: RJ11 | Physical dimensions: L × W × H (mm) | Weight: 7 kg | Volume: 10 ...

Thermotron S1.2

• Fabricante: Thermotron
• Modelo: S12

Interior dimensions: 16"W x 11"D x 12"H (41 cm x 28 cm x 31 cm) | Temperature range: -73°C to +180°C (-100°F to +35°F) | Approx. change rate: 3-4°C/Min. | Controller accuracy: ±1.1°C | Exterior dimensions: 41" W ...

SM 300 Cutting Mill

Applications: size reduction by cutting | Feed material: soft, medium-hard, tough, elastic, fibrous | Size reduction principle: shearing, cutting | Material feed size*: < 60 x 80 mm | Final fineness*: 0.25 – 20 m...