Usado machine tools en Inglaterra, Reino Unido

OPTIDRESS E Wheel Forming Attachment Imperial

Número de serie: 7113381 | Incluyendo: Graticula imperial, Nuevo Soporte Poly-Tip con 3 Polítipos nuevos

Kitamura Mycenter HX400iG Horizontal Machining Centre

• Fabricante: Kitamura
• Modelo: Mycenter HX400IG

Table size: 400 x 400mm | Table indexing: 0.001° (4th axis) | Maximum workpiece diameter: Ø630mm | Maximum workpiece height: 745mm | Machine type: Horizontal | Tapped hole (size x qty): M16 x 2.0 x 25 | Maximum t...

Kitamura Mycenter HX500iG Horizontal Machining Centre

• Fabricante: Kitamura
• Modelo: Mycenter HX500IG

Table size: 500 x 500mm | Table indexing: 0.001° (4th axis) | Maximum workpiece diameter: Ø800mm | Maximum workpiece height: 1100mm | Machine type: Horizontal | Tapped hole (size x qty): M16 x 2.0 x 24 | Maximum ...

SMEC SL5500 / SL5500M Slant Bed CNC Lathe

• Fabricante: SMEC

Swing over bed: 900mm | Swing over cross slide: 800mm | Max machining diameter: 690mm | Chuck size: 24” | Machine type: Slant Bed | Max machining length: 1097mm / 1079mm | Bar working diameter: 165.5mm | X axis t...

Kenyou VT1216 Vertical Turning Centre

• Diámetro de giro: 1,800 millimeter

Table diameter: 1250mm | Max swing diameter: 1800mm | Max turning diameter: 1600mm | Max turning height: 1300mm (1700mm opt) | Max workpiece weight: 5000kg | X travel: -100 ~ +950mm (-850 ~ +950mm opt) | Z axis: ...

Kenyou VTM1216 Vertical Turning Centre

• Diámetro de giro: 1,800 millimeter

Table diameter: 1250mm | Max swing diameter: 1800mm | Max turning diameter: 1600mm | Max turning height: 1300mm (1700mm opt) | Max workpiece weight: 5000kg | X travel: -100 ~ +950mm (-850 ~ +950mm opt) | Z axis: ...

Mylas DT52 CNC Turning Centre

• Taladro del eje: 48 millimeter

Swing over saddle: 260mm | Chuck type: DIN177E | Max bar turning length: 150mm | Max bar turning diameter: Ø51mm | Max turning length: 350mm | Max turning: 150mm | Max turning bar diameter: Ø51mm | Sub spindle ch...

HEIDELBERG MOV PH 1991

• Fabricante: Heidelberg

Zopo V10P Vertical Machining Centre

• Cono del eje: BT 40

Worktable size: 520 x 1200mm | T-slot size: 5-18 x 100mm | Max table load: 500kg | X/y/z axis travel: 1000/520/535mm | Column front to spindle centre: 582mm | Table surface to spindle nose: 100~635mm | Spindle ta...

SCM Minimax Model SC2c Panel Saw 1 Phase

• Fabricante: SCM / SCMI
• Modelo: Minimax SC 2C

58.03.45: Additional table on the sliding table for the support of panels with large dimensions | 58.02.05: Digital readout for parallel fence positions complete with digital display and magnetic band | 58.02.81:...

PG OPTIDRESS E SA50 Cable & Transducer

MYFORD MG12 Internal Grinding Attachment with Spindle & Quill’s

• Fabricante: Myford
• Modelo: MG12

Myford mg12 accesorio interno abatible parte no: 20/133/2

MYFORD MG12 Workhead Rebuilding Service

• Fabricante: Myford
• Modelo: MG12

Incluye: Nuevos rodamientos de contacto angular de precisión emparejados, nuevo husillo (si es necesario) rodamientos del motor, nuevos poleas y rodamientos, nuevas juntas para aceite, nuevas juntas antipolvo, ju...

Label Converters &Converting Lines

• Fabricante: ASHE Converting Equipment

Material width: 340mm (13″)440mm (17″)540mm (21″)600mm(24″) | Maximum rewinding diameter: 400mm (16″)600mm (24″) | Machine speed: 250m/min (820ft/min) | Materials to be run: All substrates (mainly supported) | Op...

Baker Perkins TruClean™ 590 Heavy Duty Rotary Moulder

• Fabricante: Baker Perkins