Usado loader en Nagano, Prefectura de Nagano, Japón

CLAMP ON LEAK SENSOR 9657-10

Rated primary current: AC 10 A (for leak current measurement, 50/60 Hz) | Max. allowable input (45-66 hz): Max. 30 A of continuous input | Rated output current: AC 100 mV/A | Amplitude accuracy (45-66 hz): ±1.0...

CLAMP ON SENSOR 9695-03

Rated measurement current: 100 A AC | Max. measurement current: Continuous 130 A (45 to 66 Hz) | Output rate: 1 mV AC/ A | Amplitude accuracy (45 to 66 hz): ±0.3 % rdg. ±0.02 % f.s. (*1) | Phase accuracy: ±1° (...

CHEMICAL IMPEDANCE ANALYZER IM3590

Measurement modes: LCR mode, Continuous measurement mode (LCR mode / Analyzer mode), Analyzer mode (Sweeps with measurement frequency and measurement level, temperature characteristics, equivalent circuit analysi...

POWER ANALYZER PW6001

Measurement line type: Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire | Number of input channels: Max. 6 channels; each input unit provides 1 channel for simultaneous voltage and...

AC LEAKAGE CLAMP METER CM4003 (Output and external power supply function)

Ac current range: 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS Basic accuracy 45 Hz - 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A) Basic accur...

AC LEAKAGE CLAMP METER CM4001

Ac current range: 60.00 mA/ 600.0 mA/ 6.000 A/ 60.00 A/ 600.0 A, 5 ranges (40 Hz to 1 kHz, True RMS) Basic accuracy (45-66 Hz): ±1.5% rdg ±5 dgt (60.00 mA to 6.000 A), ±2.5% rdg ±5 dgt (60.00 A to 600.0 A) Guaran...

AC FLEXIBLE CURRENT SENSOR CT9667

Rated input current: 5000 A AC/ 500 A AC | Max. allowable input: 10000 A continuous (45 to 66 Hz, requires derating at frequency) | Bandwidth: 10 Hz to 20 kHz (±3dB) | Amplitude and phase accuracy: ±2 % rdg. ±0.3...

POWER METER PW3335

Measurement lines: Single-phase/ two-wires | Measurement items: Voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency, maximum current ratio, current integration, ac...

AC LEAKAGE CLAMP METER CM4002

Ac current range: 6.000 mA, 60.00 mA, 600.0 mA, 6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS Basic accuracy 45 Hz - 400 Hz: ±1.0% rdg ±5 dgt (6.000 mA to 6.000 A), ±1.5% rdg ±5 dgt (60.00 A, 200.0 A) Basic accur...

SWITCH MAINFRAME SW1001

Slots: 3 slots | Supported modules: MULTIPLEXER MODULE SW9001 (2-wire/4-wire) MULTIPLEXER MODULE SW9002 (4-terminal pair) | Connectible instruments: Max. 2 units 2-wire × 1 + 4-wire × 1, or 2-wire × 1 + 4-termina...

SWITCH MAINFRAME SW1002

Slots: 12 slots | Supported modules: MULTIPLEXER MODULE SW9001 (2-wire/4-wire) MULTIPLEXER MODULE SW9002 (4-terminal pair) | Connectible instruments: Max. 2 units 2-wire × 1 + 4-wire × 1, or 2-wire × 1 + 4-termin...

BATTERY INSULATION TESTER BT5525

• Fabricante: HIOKI E.E

Main functions: Insulation resistance test Break Down Detect function (BDD) Contact check function | Output specifications: Output voltage : 25 V to 500 V, Setting resolution 1 V Charging current (Current limit ...

BATTERY TESTER BT3554-50

Resistance measurement range: 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges Accuracy: ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt) Testing source freq...

BATTERY CELL VOLTAGE GENERATOR SS7081-50

Number of channels: 12 | Maximum in-series connections: In-series connections of instrument up to and including a maximum in-series output voltage of 1000 V | Output range: DC voltage: 0.0000 V to 5.0250 V (set i...