Usado ethernet network switches en burugaria

Blackmagic Design Cloud Store 320TB

• Fabricante: Blackmagic Design

10g ethernet ports: 4 x 100/1000/10G BASE-T | 1g ethernet ports: 2 x 100/1000 BASE-T | Ingest usb-c port: 1 x USB 3.0 (up to 5Gb/s). Automatically transfers files from USB drive to Cloud Store. | Backup usb-c por...

Focusrite Pro RedNet X2P Audio Interface

• Fabricante: Focusrite

Focusrite Pro RedNet D16R MkII AES/EBU Audio Interface

• Fabricante: Focusrite

Input trim: -78 to 0dB in 1dB steps (per channel) | Output trim: -78 to 0dB in 1dB steps (per channel) | Sample rate range: 32 to 216 kHz | Gain error: -0.3dB | Dynamic range: ＞ 138dB (-60 dBFS method) | Thd + n:...

Blackmagic Design Cloud Store 20TB

• Fabricante: Blackmagic Design

10g ethernet ports: 4 x 100/1000/10G BASE-T | 1g ethernet ports: 2 x 100/1000 BASE-T | Ingest usb-c port: 1 x USB 3.0 (up to 5Gb/s). Automatically transfers files from USB drive to Cloud Store. | Backup usb-c por...

CISCO IE-3000-8TC Ethernet Network Switch

• Fabricante: Cisco

Blackmagic Design Teranex Mini Converter IP Video 12G

• Fabricante: Blackmagic Design

Sdi video inputs / outputs: 1 x 10-bit HD-SDI, 6G-SDI and 12G-SDI | Updates: USB 2.0 high speed (480Mb/s) interface or via Ethernet | Configuration: Ethernet or USB 2.0 for firmware updates and IP address setting...

LaCesa Model 101 Stick Winder

• Fabricante: LaCesa

Servo spindle motor power: 97 lb/in @ 2000 RPM ~ 3 HP Brushed | Spindle speed: 0 ~ 2,000 with 1 1 ratio | Transmission ratio: 4 1, 3 1, 2 1, 1 1 | Spindle positioning: .45 degree ~ 800 Counts per Rev | Pitch reso...

Blackmagic Design Cloud Store 80TB

• Fabricante: Blackmagic Design

10g ethernet ports: 4 x 100/1000/10G BASE-T | 1g ethernet ports: 2 x 100/1000 BASE-T | Ingest usb-c port: 1 x USB 3.0 (up to 5Gb/s). Automatically transfers files from USB drive to Cloud Store. | Backup usb-c por...

Bachi Model 230

• Fabricante: Bachi

Spindle: 4 on 3" Centers | Servo spindle motor power: 50 lb/in @ 4000 RPM ~ 3.2 HP Brushed | Spindle speed: 0 ~ 12,000 with 1 1 ratio | Motor/spindle pulley ratio: 1 1, 2 1, 3 1 with optional pulleys | Spindle po...

Bachi Model 160

• Fabricante: Bachi

Spindles: 12 on 2" Centers / 8 on 3" Centers | Servo spindle motor power: 50 lb/in @ 4000 RPM ~ 3.2 HP Brushed | Spindle speed: 0 ~ 6,000 with 3 1 ratio | Motor/spindle pulley ratio: 1 1, 2 1, 3 1 with optional p...

Sonifex AVN-DIO10-12G Dante to 12G/6G/3G/HD/SD-SDI Embedder/De-Embedder

• Fabricante: Dante

Input impedance: 75Ω Unbalanced | Sdi supported standards: Loop-through - Output follows input Generator – See above standards | Supported video formats: Loop-through - Output follows inputGenerator – See above f...

Sonnet Twin25G PCIE 25GbE Networking Card

• Fabricante: Sonnet

External connectors: Two SFP28 optical transceivers | 25gbe controller: Mellanox ConnectX | Packets: Maximum packet size: 9000 bytes (jumbo frames)

AJA Video Systems KUMO Control Panel

• Fabricante: AJA Video Systems

Sonifex AVN-DIO16 Dante to 4 Analogue XLR Outputs Dante

• Fabricante: Dante

Pin 1: Chassis Ground | Pin 2: Phase | Pin 3: Non Phase | Input impedance: 200Ω balanced | 0dbfs line-up: Selectable +12/+18/+24dBu | Frequency response: 20Hz to 20kHz, +0/-0.5dB (ref 1kHz) | Aoip standard: Dante...

Sonifex AVN-DIO15 4 Analogue XLR Inputs to Dante

• Fabricante: Dante

Pin 1: Chassis Ground | Pin 2: Input Phase | Pin 3: Input Non Phase | Input impedance: 5kΩ Unbalanced | 0dbfs line-up: Selectable +12/+18/+24dBu | Frequency response: 20Hz to 20kHz, +0/-0.2dB (ref 1kHz) | Aoip st...