Building Filters
HyFQ-2000 Series
- Fabricante: HORIBA Europe GmbH
Basement accuracy mass flow sensor: ≤ 0.35 %MV | Fuel inlet pressure: 40 bar | Fuel outlet to engine pressure: up to 25 bar | Ambient/media temperature [°c]: Main Unit: +5 ... +40 DUT Unit: -2...
Kioto, Japón2021 HANSE 458 2021
- Fabricante: Hanse
- Modelo: 458
Length: 46 ft 1 in (14.05 m) | Rig: I 17.80 m 58'5" | Engine type: Inboard | Drive type: Sail Drive | Propeller: 3 blade, bronze material | Engine hours: 400 hours (Dec 2022)
$354,000 USDJapónHyEVO
- Fabricante: HORIBA, Ltd.
Field: Application example | Environment / energy: Hydrogen combustion in hydrogen gas turbines, hydrogen boilers Hydrogen production through water electrolysis Development of fuel cells as power generation devic...
Kioto, JapónMEXA-ONE-XL-NX
- Fabricante: HORIBA, Ltd.
Measurement target: Exhaust gas from internal combustion engine and gas turbine (Direct/Conti-dilute) | Emissions standard: US EPA GHG *1 , GTR No.15 (NO 2 , N 2 O, NH 3 ) | Measurement range: NO (Low) 0-200 ppm ...
Kioto, JapónFTX-ONE-CS/RS
- Fabricante: HORIBA, Ltd.
Measurement target: Exhaust gas from internal combustion engine (Direct measurement) | Components: Gasoline / Diesel | Co: 0-200ppm 0-1000ppm 0-5000ppm 0-2 vol% 0-10 vol% | Co2: 0-1 vol% 0-5 vol% 0-20 vol% | No: ...
Kioto, JapónSPARC Engine
- Fabricante: HORIBA Europe GmbH
Kioto, JapónPTFM-ONE-DT
- Fabricante: HORIBA UK Limited
900°c exhaust gas limit: Allows the freedom to test engines under extreme conditions without worrying if the flow meter can handle those temperatures | -1.25kpa to +7.5kpa sensor range: Shows both positive flow &...
Kioto, JapónTITAN Engine
- Fabricante: HORIBA Europe GmbH
Kioto, JapónPTFM-1000V2
- Fabricante: HORIBA UK Limited
Test vehicle/engine: Diesel (HDD, LDD), Gasoline, LPG and CNG vehicles, Ethanol, Propane, Butane | Configuration: Interface unit connected to pitot tube via umbilical cable. Pitot tube can be standard (0 - 230ºC)...
Kioto, JapónFTX-ONE-CL
- Fabricante: HORIBA, Ltd.
Measurement target: Exhaust gas from internal combustion engine (Dilute measurement) | Target components*1: Max. 28 components | Target components sets*2: Standard set : Gasoline / Diesel vehicle CNG set | Princi...
Kioto, JapónOBS-ONE-XL (IRLAM)
- Fabricante: HORIBA, Ltd.
Measurement target: Light and heavy duty vehicle engine exhaust gas | Components and range: NH 3 0 - 1500 ppm N 2 O 0 - 1000 ppm | Measurement principle: Quantum cascade laser infrared spectroscopy (QCL-IR) | Sam...
Kioto, JapónMEXA-1300R
- Fabricante: HORIBA, Ltd.
Compatible standards: CE, FCC (Class A) | Analyzing target: Exhaust gases of two-cycle and four-cycle engines | Measurement item and range: CO : 0.00% vol - 10.00% vol HC : 0ppm vol - 10,000ppm vol (N-hexane) CO...
Kioto, JapónADS EVO
- Fabricante: HORIBA, Ltd.
Driving functions: Standard drive traces (emissions, etc) ★Performance test mode Auto/Manual adjust (pedal and shift) Learning mode Warm up mode Constant speed mode Manual mode | Applicable vehicles: MT, AT, CVT,...
Kioto, JapónSPCS-ONE
- Fabricante: HORIBA, Ltd.
Kioto, JapónStandard type: MEXA-ONE-FT Euro VI compliance type: MEXA-ONE-FT-E
- Fabricante: HORIBA, Ltd.
Conformed standards: CE, FCC, KC | Target components and ranges*1: Maximum 28 components Standard component set: for gasoline/diesel vehicle (18 components and “NO+NO 2 ”) Optional component set: for CNG-fueled v...
Kioto, Japón