Usado electro design en Japón

HORIBA Advanced Techno Co., Ltd. Finesse Solutions, LLC HE-960CW

• Fabricante: Horiba

Product name: Industrial 2-channel conductivity meter | Measurement method: Electrode type (2-electrode method) | Sensor input: 2 channels (for concurrent measurement with sensors isolated each other) | Cell cons...

HORIBA STEC, Co., Ltd. D700uF

• Fabricante: Horiba

HORIBA STEC, Co., Ltd. D700T

• Fabricante: Horiba

Este producto está disponible en los siguientes países y territorios: China Alemania Irlanda Israel Italia Japón Korea (Sur) Malasia Singapur Taiwán Reino Unido Estados Unidos

CLAMP ON POWER LOGGER PW3365

• Fabricante: HIOKI E.E

Measurement line & number of circuits: 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 c...

HORIBA Advanced Techno Co., Ltd. HE-960RW-GC(W)

• Fabricante: Horiba

Rango de medición: 0.00 - 2.00 / 0.00 - 20.00 / 0.0 - 100.0 MΩ・cm | Ambiente ambiente: Temperatura: -5°C a 45°C, Humedad relativa: 20% a 85% (sin condensación de rocío) | Suministro de energía: Voltaje nominal 24...

AUTOMATIC INSULATION / WITHSTANDING HiTESTER 3153

Functions: Program up to 32 files of 50 step test settings. 10 sets each of dielectric strength and insulation test settings, hold, buzzer | Monitor functions: Output voltage, detected current, measured resistanc...

IN-CIRCUIT TESTER FA1220-02

• Fabricante: HIOKI E.E

Number of test points: Standard: 0 pins (scanner boards optional) Max. 2048 pins (expandable in blocks of 128 pins)* * The maximum number of active pins for each test type depends on the total number of scanner b...

ANALOG MΩ HiTESTER 3490

• Fabricante: HIOKI E.E

Rated output voltage: 250 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length 0.05 to 50 MΩ | Lower limit resistance: 0.25 MΩ | Overload protection: 660...

INSULATION TESTER ST5520

• Fabricante: HIOKI E.E

Measurement items: Insulation resistance (Applied DC voltage method) | Testing voltage: (Measurement range: AUTO/MANUAL setting is possible) 25 V ≤ V < 100 V (2.000/20.00/200.0 MΩ), 100 V ≤ V < 500 V (2.000/20.0...

HORIBA Advanced Techno Co., Ltd. Finesse Solutions, LLC HE-960CW

• Fabricante: Horiba

Product name: Industrial 2-channel conductivity meter | Measurement method: Electrode type (2-electrode method) | Sensor input: 2 channels (for concurrent measurement with sensors isolated each other) | Cell cons...

INSULATION TESTER IR4053

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Measuring range/ accuracy: 0.200 to 500 MΩ / ±4% rdg. 501 to 2000 MΩ / ±8% rdg. | Other measuring range / accuracy: 0 to 0.199 MΩ / ±2%...

RESISTANCE HiTESTER RM3543

Measurement method: Four-terminal, constant-current DC | Resistance range: 10 mΩ (Max. 12.00000 mΩ, 0.01 μΩ resolution) to 1000 Ω range (Max. 1200.000 Ω, 1 mΩ resolution), 7 steps | Display: Monochrome graphic LC...

ANALOG MΩ HiTESTER IR4018

• Fabricante: HIOKI E.E

Rated output voltage: 1000 V DC | Effective maximum indicated value: 2000 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length, 2 M to 1000 MΩ | Lower limit resistance: 1 MΩ (measurement resistance v...

ANALOG MΩ HiTESTER IR4017

• Fabricante: HIOKI E.E

Rated output voltage: 500 V DC | Effective maximum indicated value: 1000 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length, 1 M to 500 MΩ | Lower limit resistance: 0.5 MΩ (measurement resistance v...

VOLTAGE DETECTOR 3481

• Fabricante: HIOKI E.E

Measurement function: Voltage detection | Operating voltage range: 40 V to 600 V AC (When brought into contact with a 2 mm^2 insulated cable equivalent to 600 V polyvinyl chloride insulated wire) Maximum sensitiv...