Usado electro design en Japón

HORIBA Advanced Techno Co., Ltd. Finesse Solutions, LLC HE-960CW

• Fabricante: Horiba

Product name: Industrial 2-channel conductivity meter | Measurement method: Electrode type (2-electrode method) | Sensor input: 2 channels (for concurrent measurement with sensors isolated each other) | Cell cons...

HORIBA STEC, Co., Ltd. D700T

• Fabricante: Horiba

This product is available in the following countries and territories: China Germany Ireland Israel Italy Japan Korea (South) Malaysia Singapore Taiwan United Kingdom United States

HORIBA STEC, Co., Ltd. D700uF

• Fabricante: Horiba

INSULATION TESTER IR4053

• Fabricante: HIOKI E.E

Rated output voltage: 50 V DC | Effective maximum indicated value: 100 MΩ | Measuring range/ accuracy: 0.200 to 500 MΩ / ±4% rdg. 501 to 2000 MΩ / ±8% rdg. | Other measuring range / accuracy: 0 to 0.199 MΩ / ±2%...

HIGH VOLTAGE SCANNER 3930

Operation modes: Multi-mode: Scanning of user-selected points for high 4 ch / low 4 ch Single mode: Common scan of high 8 ch - common | Rated voltage used: 5 kV AC / 5 kV DC | Operation indications: Lamps light u...

WEIGHT ELECTRODE SME-8320

Main electrode dia.: 50 mm (1.97 in) | Ring electrode inner-dia.: 70 mm (2.76 in) | Ring electrode outer-dia.: 80 mm (3.15 in) | Included accessories: Banana plug ×2

MAGNETIC FIELD HiTESTER FT3470-51

Magnetic flux density (bandwidth): 10 Hz to 400 kHz/ 10 Hz to 2 kHz/ 2 kHz to 400 kHz | Exposure level: General public/ Occupational | Display: Single axes X, Y, Z (2000 counts), Composite RMS value R (3464 count...

MAGNETIC FIELD HiTESTER FT3470-52

Magnetic flux density (bandwidth): 10 Hz to 400 kHz/ 10 Hz to 2 kHz/ 2 kHz to 400 kHz | Exposure level: General Public/ Occupational | Display: Single axes X, Y, Z (2000 counts), Composite RMS value R (3464 count...

ANALOG MΩ HiTESTER IR4016

• Fabricante: HIOKI E.E

Rated output voltage: 500 V DC | Effective maximum indicated value: 100 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length, 0.1 M to 50 MΩ | Lower limit resistance: 0.5 MΩ (measurement resistance v...

CLAMP ON POWER LOGGER PW3365

• Fabricante: HIOKI E.E

Measurement line & number of circuits: 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 c...

SHORT-OPEN TESTER FA1221

• Fabricante: HIOKI E.E

Number of test points: 128 pins (during 4-terminal measurement, up to 32 sets) | Number of test steps: Round-robin short/open : 128 pins Component data : Max. 10000 steps Charge data : 40 sets Pin contact data : ...

IN-CIRCUIT TESTER FA1220-02

• Fabricante: HIOKI E.E

Number of test points: Standard: 0 pins (scanner boards optional) Max. 2048 pins (expandable in blocks of 128 pins)* * The maximum number of active pins for each test type depends on the total number of scanner b...

HORIBA Advanced Techno Co., Ltd. Finesse Solutions, LLC HE-960CW

• Fabricante: Horiba

Product name: Industrial 2-channel conductivity meter | Measurement method: Electrode type (2-electrode method) | Sensor input: 2 channels (for concurrent measurement with sensors isolated each other) | Cell cons...

RESISTANCE HiTESTER RM3543

Measurement method: Four-terminal, constant-current DC | Resistance range: 10 mΩ (Max. 12.00000 mΩ, 0.01 μΩ resolution) to 1000 Ω range (Max. 1200.000 Ω, 1 mΩ resolution), 7 steps | Display: Monochrome graphic LC...

ANALOG MΩ HiTESTER IR4018

• Fabricante: HIOKI E.E

Rated output voltage: 1000 V DC | Effective maximum indicated value: 2000 MΩ | Accuracy 1st effective measuring range: ±2 % of scale length, 2 M to 1000 MΩ | Lower limit resistance: 1 MΩ (measurement resistance v...