Usado converting machines

1998 SOMA Cortadora transversal

• Fabricante: Soma

Width (mm): 780 | Sheet length: sheet length: 295 - 860 mm, sheet width: 210 - 780 mm | Materials: Paper, Alufilm | Cycle / min: 130m/min | Max diameter reel unwinder: 1000mm

2017 MARIO COTTA Cortadora transversal

• Fabricante: MARIO COTTA

Tipo: SINGLE BLADE | Width (mm): 1600 | Sheet length: 1100 | Materials: Paper and board | Cycle / min: up to 60/min | Max diameter reel unwinder: 1200 | Drive: Servo | Note: Paper pre web guided In line slitting...

2005 GALILEO MEGA 2010 / B Metallizzadora

• Fabricante: Galileo
• Modelo: Mega

Modello: MEGA 2010 / B | Working width (mm): 2020 | Materials: Polyester (PET) 6-60 µ Oriented Polypropylene (OPP) 12-100 µ PVC 20-80 µ Low-density polyethylene (LDPE) 25-100 µ High-density polyethylene (HDPE...

1998 GENERAL VACUUM EQUIPMENT EHF 2250-2250 Metallizzadora

• Fabricante: GENERAL VACUUM EQUIPMENT

Modello: EHF 2250-2250 | Working width (mm): 2250 | Materials: BOPP 15-80my ; PET 09-50my; CPP 20-40my; LDPE 25-50my ; Nylon 12-50my ; UPVC 20-80my | Speed: 72-720m/min line speed | Max diameter reel unwinder: 10...

2005 GENERAL VACUUM EQUIPMENT Metallizzadora

• Fabricante: GENERAL VACUUM EQUIPMENT

Working width (mm): 2050 | Materials: BOPP: 8 - 80 micron PET: 9 to 50 micron CPP: 20 - 50 micron PAPER: 40 - 80 gsm | Max diameter reel unwinder: 1000 | Max diameter reel rewinder: 1000 | Evapouration boot...

2010 APPLIED FILM Topmet Metallizzadora

• Fabricante: Oerlikon - Leybold
• Modelo: Topmet

Modello: Topmet | Working width (mm): 2050 | Note: Working pressure -approx. 4 × 10* mbar Nature of coating - Single-sided Coating area - Full web width, with 10 mm edge masking Coating width - min. 900 mm / max....

1980 WINDMÖLLER & HÖLSCHER 9210 Cortadora transversal

• Fabricante: W&H

Modello: 9210 | Width (mm): 830 | Materials: Paper | Note: FLEXOPRESS WITH INLINE SHEET-CUTTER, Printing Width 800mm , 3 colors for printing roll to sheet 1 ceramic anilox rollers

2006 MABEG RS 105 Cortadora transversal

• Fabricante: MABEG

Modello: RS 105 | Note: Sheet size max.1040x740mm, min. 520x450mm Speed 15000 sheets/hour

1985 STRACHAN & HENSHAW Cortadora transversal

• Fabricante: Strachan & Henshaw

Tipo: Synchro | Width (mm): 1300 | Sheet length: 500-1550mm | Cycle / min: max 400 cuts/min. max linear speed 300m/min. Actual operating speed depends on sheet length and material | Max diameter reel unwinder: 1...

1996 CAVALLERI CT15 Cortadora transversal

• Fabricante: Cavalleri

Modello: CT15 | Width (mm): 1500mm | Sheet length: min 500-1000mm max | Materials: Paper/plastic from 30 to 120gsm | Cycle / min: 90 | Max diameter reel unwinder: diam 1000mm | Note: Register control with photoce...

2016 MPS EB 370-8 COLOR FLEXO

 printcylinders: Z90,92,96,102,128, 78, 88 etc. | Sale reason: Purchase of a new wider Converting machine

2005 GALILEO VACUUM SYSTEM Metallizzadora

• Fabricante: Galileo

Modello: VACUUM SYSTEM | Note: Dimensions including electrical cabinet : width 9m - lenght with opened carriages) 19.5m -height 3,6m-approx weight 55t Machine has a list of maintenances advised to be performed ...

2002 GALILEO MEGA 2410 Metallizzadora

• Fabricante: Galileo
• Modelo: Mega

Modello: MEGA 2410 | Overhaul/renovation: 2014 The evaporation boats are controlled by a separate cabinet with Eurotherm drives. It was installed with Eurotherm Thyristorunit , in 2014 was completely replaced wi...

1998 POLAR 176 ED Cortadora transversal

• Fabricante: Polar

Modello: 176 ED | Width (mm): 1760 | Sheet length: 126x164 | Note: - working depth 202,5 cm - transfer width between backside table and Transomat is 176 cm - with ED controller - left side pneumatic lowerable sid...

1990 GENERAL VACUUM EQUIPMENT Metallizzadora

• Fabricante: GENERAL VACUUM EQUIPMENT

Working width (mm): 1980