Usado continuous en Singapur

Makita LH1201FL Table Top Miter Saw

• Fabricante: Makita

Continuous rating input: 1,650W | Max cutting capacity: at 0 degrees | Blade diameter: 305mm (12") | No load speed (rpm): 3,800 | Dimensions: 610 x 535 x 692mm | Net weight: 20.7kg (45.6lbs) | Power supply cord: ...

Makita 4131/B Metal Cutter with 3500 rpm

• Fabricante: Makita

4131/b: 110V | Continuous rating input: 1,100W | Blade diameter: 185mm (7-1/4”) | No load speed: 3,500 rpm | Overall length: 358mm (14-1/8”) | Net weight: 5.1kg (11.3lbs) | Power supply cord: 2.5m (8.2ft)

Makita TW1000 Impact Wrench

• Fabricante: Makita

High tensile bolt: M22- M24 (7/8”-15/16”) | Square drive: 25.4mm (1”) | Continuous rating input: 1,200W | No load speed (rpm): 1,400 | Impacts per minute (ipm): 1,500 | Max tightening torque: 1,000N.m (738ft.lbs)...

Makita 1805N Power Planer

• Fabricante: Makita

Continuous rating input: 1,140W | Planing width: 155mm (6-1/8”) | Planing depth: 2 mm (1/16") | No load speed (rpm): 15,000 | Overall length: 445mm (17-1/2”) | Net weight: 7.9kg (17.4lbs) | Power supply cord: 5.0...

KENWOOD SG-5150 FM Stereo AM/AM Signal Generator

• Fabricante: Kenwood
• Modelo: SG-5150

Makita Metal Cutter

• Fabricante: Makita

Capacitymax. cutting: 63mm (2-1/2”)

KIKUSUI TOS8870A AC Withstand Volt/Insulation Resistant Tester

• Fabricante: Kikusui
• Modelo: TOS8870A

ANRITSU MA9712A Optical Power Sensor

• Fabricante: Anritsu
• Modelo: MA9712A

AIKO 230V 1.8kW Gasoline Inverter Generator

• Fabricante: Aiko

Potencia nominal/max. salida a.c.: 1.8 kW | Frecuencia: 50 Hz | Tensión nominal: 230V | Modelo de motor: LT48F | Tipo de motor: Enfriamiento por aire 4 tiempos OHV motor monocilíndrico | Sistema de encendido: mag...

GOODWILL INSTEK GPS-3030D Laboratory DC Power Supply

• Fabricante: GW Instek
• Modelo: GPS-3030D

GOODWILL INSTEK GPC-3060D Power Supply

• Fabricante: GW Instek
• Modelo: GPC-3060D

YAMA 110V, 2,500kg ,600W Cable Puller

• Fabricante: YAMA

Capacidad de tracción: 2,500kg | 50hz: 2.5 m/min | 60hz: 3.0 m/min | Tren de engranajes: engranaje hipoidal más engranajes rectos | Longitud: 104mm | Diámetro del tambor: 74mm | Diámetro de la brida: 94mm | Peso ...

YAMA 230V, 2,500kg ,600W Cable Puller

• Fabricante: YAMA

Capacidad de tracción: 2,500kg | 50hz: 2.5 m/min | 60hz: 3.0 m/min | Tren de engranajes: engranaje hipoidal más engranajes rectos | Longitud: 104mm | Diámetro del tambor: 74mm | Diámetro de la brida: 94mm | Peso ...

FLUKE/PHILIPS PM6681 High Resolution Prog. Tmer/Counter/Analyzer

• Fabricante: Fluke
• Modelo: PM6681

Makita EX2650LHM SPLIT SHAFT BRUSH CUTTER

• Fabricante: Makita

Developed in compliance with: The following exhaust emission regulation; CARB Tier 3, EPA Pahse 2, EU Stage 2, Safety regulations of the EC Directives | Available attachments include: Brush Cutter, Line Trimmer, ...