Usado continuous en oranda

Kendall SCD 700 Smart Compression Controller

• Fabricante: Kendall

Smart compression™ cycles: Automatically adjusts compression based on real-time venous refill measurements for optimized therapy. | Patient sensing™ technology: Detects whether sleeves are properly applied and ac...

1995 Blanchard 22AD-42, 1995, PROG. AUTO CYCLE,

• Fabricante: Blanchard
• Modelo: 22-42

Chuck diameter: 42" | Swing inside guards: 48" | Vertical range under new wheel: 24" | Maximum load on chuck: 3,000 LBS | Grinding wheel diameter: 22" | Grinding wheel speed: 720 RPM | Chuck speeds (6): 6 TO 24 R...

Physio-Control LifePak 20 Defibrillator

• Fabricante: Physio-Control

Manual mode: Provides a normal operating capability for ALS users. Allows access to manual mode energy selections up to 360J, synchronous cardioversion and pacing. ECG waveform is displayed. | Aed mode: (Consiste...

1988 Blanchard 22AD-42, 1988, PROG. AUTO CYCLE CONTROL

• Fabricante: Blanchard
• Modelo: 22-42

Chuck diameter: 42" | Swing inside guards: 48" | Vertical range under new wheel: 24" | Maximum load on chuck: 3,000 LBS | Grinding wheel diameter: 22" | Grinding wheel speed: 720 RPM | Chuck speeds (6): 6 TO 24 R...

Performance Health 081664184 Kinesiology Tape Bulk Continuous Roll

• Fabricante: Hygenic/Performance Health

1980 Okamoto ACCUGAR 124N, 1980, 3X AUTO FEEDS, AUTO IDF

• Fabricante: Okamoto
• Modelo: ACC-124N
• Longitud de rectificado: 609.5999999999999 millimeter

Maximum grinding length: 24" | Maximum grinding width: 12" | Maximum height under 14" wheel: 13.7" | Maximum longitudinal movement: 29.5" | Maximum cross movement: 13.6" | Longitudinal hydraulic feed: 1' TO 100' ...

Sharp SH-2047

• Fabricante: Sharp
• Modelo: SH-2047
• Longitud de rectificado: 1,193.8 millimeter

Nominal grinding length: 47" | Nominal grinding width: 20" | Maximum distance: table to spindle center | X & y travels (cross x longitudinal): 20.9" x 53.2" | Spindle center to table surface: 27.6" | Table workin...

Sharp SH-2447

• Fabricante: Sharp
• Modelo: SH-2447
• Longitud de rectificado: 1,193.8 millimeter

Nominal grinding length: 47" | Nominal grinding width: 24" | Maximum distance: table to spindle center | X & y travels (cross x longitudinal): 24.8" x 53.2" | Spindle center to table surface: 27.6" | Table workin...

Sharp SH-2460

• Fabricante: Sharp
• Modelo: SH-2460
• Longitud de rectificado: 1,524 millimeter

Nominal grinding length: 60" | Nominal grinding width: 24" | Maximum distance: table to spindle center | X & y travels (cross x longitudinal): 24.8" x 65" | Spindle center to table surface: 27.6" | Table working ...

2015 SALVAGNINI S4-P4

• Fabricante: Salvagnini
• Modelo: P4

Equipado con: MVP30.H6: (6) Level Punch Parts Storage and Retrieval System RIP3015: Part Turn Over Connection RBU: Rotating Brush for Cleaning Incoming Sheets P4Xe-2516.Six: Automatic Panel Bender (98.5" Bend Len...

Sharp SG-820 2A

• Fabricante: Sharp
• Longitud de rectificado: 551.18 millimeter

Maximum grinding length: 21.7" | Maximum grinding width: 8.7" | Maximum distance: table to spindle center | Working surface (w x l): 8 x 20" | Maximum longitudinal travel: 23.6" | Maximum cross travel: 9.25" | Hy...