Usado cnc tornos en berugi

KLM 200SM

KLM 300SM

Características: KLM 300SM | husillo secundario: SI | Diámetro máximo de giro: 16.5 | Longitud máxima de giro: 24 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secundar...

KLR 200

Características: KLR 200 | Diámetro máximo de giro: 13.8 | Longitud máxima de giro: 22.4/39.4 | Husillo agujero pasante: 2.44 | Chuck: 8.26

HL 44

Characteristics: HL 44 | I turn over the bench: 44″ | Turning on the cross slide: 17.3″ | I turn over the neckline: 61 ″ | Width of the bed: 24″ | Distance between points: 120″ (Opt 80″ / 160″ / 200″ /240″ /280″ ...

HW 26

Characteristics: HW 26 | I turn over the bench: 26″ | Turning on the cross slide: 17.3″ | I turn over the neckline: 35″ | Width of the bed: 15.75″ | Distance between points: 80″ (O 120″ / 160″) | Cross travel: 14...

ML 2060T

• Taladro del eje: 127 millimeter

Characteristics: ML 2060T | I turn over the bench: 20″ | Turning on the cross slide: 14 " | I turn over the neckline: 27.5″ | Width of the bed: 12 ″ | Distance between points: 57″ | Cross travel: 12 ″ | Auxiliary...

KLS 1760II

Characteristics: KLS 1760II | I turn over the bench: 17″ | Turning on the cross slide: 10.2″ | I turn over the neckline: 22 ″ | Width of the bed: 12 - 1/4″ | Distance between points: 60″ | Cross travel: 9.26″ | A...

CHC 22 SERIES

Characteristics: CHC 22 SERIES | I turn over the bench: 21.7″ | Turning on the cross slide: 11.8″ | Distance between points: 40″ / 60″ / 80″ / 120″ | Width of the bed: 13.58″ | Spindle nose: ASA A2-8 | Hole throu...

CSC 18 SERIES

Characteristics: CSC 18 SERIES | I turn over the bench: 18″ | Turning on the cross slide: 10 " | Distance between points: 38″ / 57″ | Width of the bed: 12 ″ | Spindle nose: ASA A2-6 | Hole through the spindle: 2....

KLS 1220N

Characteristics: KLS 1220N | I turn over the bench: 11.8″ | Turning on the cross slide: 5.3″ | Distance between points: 19.6″ | Width of the bed: 13.8″ | Spindle nose: D1-4 | Hole through the spindle: 1.49″ | Spi...