Usado automatic en Japón

HORIBA Advanced Techno Co., Ltd. NO-2000

• Fabricante: Horiba

Product name: Ammonia/Nitrate Nitrogen Meter | Converter model: HC-200N | Sensor model: NO-2000: Nitrate nitrogen sensor | Sensor tip model: 7693: Nitrate ion tip, 7694: Chloride ion tip for compensation, 7211: R...

UV500 ATEX

Sample flow: Recommended : 0 - 5 L/MIN 0 – 0.5 l/min for NH4 or H2S | Sample pressure: 0 - 4 Bar (0 - 1 Bar with sampling peristaltic pump) 0 - 0.5 Bar for NH4 or H2S | Sample temperature: 0 °C to 80 °C 0 - 30 °C...

HORIBA, Ltd. Partica LA-960V2

• Fabricante: Horiba

Measurement principle: Mie scattering and Fraunhofer diffraction | Measurement range: 100 nm - 5000 μm | Measurement time: Typical measurement takes 2 seconds or longer. | Measurement method: Circulation measurem...

RESISTANCE METER RM3545

Resistance range: 10 mΩ (12.00000 mΩ display Max., 10 nΩ resolution) to 1000 MΩ range (1200.0 MΩ display Max., 100 kΩ resolution), 12 steps [LP ON] 1000 mΩ (1200.00 mΩ display Max., 10 µΩ resolution) to 1000 Ω ra...

CHEMICAL IMPEDANCE ANALYZER IM3590

Measurement modes: LCR mode, Continuous measurement mode (LCR mode / Analyzer mode), Analyzer mode (Sweeps with measurement frequency and measurement level, temperature characteristics, equivalent circuit analysi...

AC/DC CLAMP METER CM4373-50

Dc current range: 600.0 A/2000 A, Basic accuracy: ±1.3% rdg. ±0.3 A (600 A range) | Ac current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: ±1.3% rdg. ±0.3 A (at 600 A) | Crest fac...

AC/DC CLAMP METER CM4371-50

Dc current range: 20.00 A/600.0 A, Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range) | Ac current range: 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy: 45-66 Hz: ±1.3% rdg. ±0.08 A (at 20 A) | Crest fa...

HORIBA Advanced Techno Co., Ltd. OPSA-150

• Fabricante: Horiba

Product name: Organic Pollutant Monitor (UV meter) | Measurement item: UV absorbance, VIS absorbance, COD conversion concentration, TURB (turbidity) conversion concentration | Measurement principle: Dual optical ...

Rice transplanter Kubota 6 Article 148 hours Superior SPA 6 Monroe attachment (automatic horizontal) Popular marker Seedling fish kit included Double wheel

• Fabricante: Kubota

AC/DC CLAMP METER CM4375-50

Dc current range: 1000 A, (Max. display 999.9 A) , Basic accuracy: ±1.3% rdg. ±0.3 A (at 30.1 A - 999.9 A) | Ac current range: 1000 A (Max. display 999.9 A, 10 Hz to 1 kHz, True RMS), Basic accuracy 45-66 Hz: ±1...

MDLT-ONE

• Fabricante: HORIBA, Ltd.

Pm sampling method: Partial flow dilution method | Control modes for dilution: Proportional sampling mode (Const. split ratio)/ Fixed dilution ratio mode (Const. dilution ratio)/ Fixed flow rate mode (Manual cont...

HORIBA Advanced Techno Co., Ltd. CODA-500

• Fabricante: Horiba

Object: COD concentration in water | Dimensions: 600 (W) mm × 510 (D) mm × 1600 (H) mm* 1 | Mass: Approx. 150 kg | Power source: 100 V to 240 V AC ±10%, 50 Hz/60 Hz | Power consumption: 100 V to 120 V AC: Approx....

Ise ki Combine 4 Row Cutting HA 441 G - V 2 FRL WK Crawler inclination height adjustment Automatic Monoro turbo engine E 3 CD 715 hours Current situation

HORIBA Advanced Techno Co., Ltd. TPNA-500

• Fabricante: Horiba

Dimensions *1: 460 (W) mm × 385 (D) mm × 1600 (H) mm | Mass: Approx. 87 kg | Power supply: 100 V to 240 V AC ±10%, 50 Hz/60 Hz | Power consumption: 100 V to 240 V AC: Approx. 250 VA | Repeatability: Within ±3% of...

2008 MAZAK QTN-200II

• Fabricante: マザック
• Modelo: QUICK TURN NEXUS 200 II
• Taladro del eje: 60 mm

Controlador: MAZATROL MATRIX NEXUS | Oscilación máxima: diámetro de 610 mm | Colgar en porta-útiles: diámetro de 350 mm | Diámetro máximo de trabajo: 350 mm | Longitud máxima de trabajo: 514 mm | Velocidad máxima...