Usado cnc

SSM 1340BV

Characteristics: SSM 1340BV | I turn over the bench: 13″ | Turning on the cross slide: 8-1/4″ | I turn over the neckline: 18-1/2″ | Width of the bed: 7 - 1/2″ | Distance between points: 40″ | Cross travel: 6-3/4″...

KLS 1840G

Characteristics: KLS 1840G | I turn over the bench: 18″ | Turning on the cross slide: 10.8″ | I turn over the neckline: 27.2″ | Width of the bed: 12 ″ | Distance between points: 40″ | Cross travel: 11.4″ | Auxili...

KLS 1340A

Characteristics: KLS 1340A | I turn over the bench: 13″ | Turning on the cross slide: 7-1/4″ | I turn over the neckline: 18-3/4″ | Width of the bed: 7 - 3/8″ | Distance between points: 40″ | Cross travel: 6 - 1/2...

Tor CNC HARDINGE Modelo SV-1500

• Fabricante: Hardinge

TORNO CNC Millano BNC-12

• Fabricante: Miyano
• Modelo: BNC12C

CHC 22 SERIES

Characteristics: CHC 22 SERIES | I turn over the bench: 21.7″ | Turning on the cross slide: 11.8″ | Distance between points: 40″ / 60″ / 80″ / 120″ | Width of the bed: 13.58″ | Spindle nose: ASA A2-8 | Hole throu...

CSC 18 SERIES

Characteristics: CSC 18 SERIES | I turn over the bench: 18″ | Turning on the cross slide: 10 " | Distance between points: 38″ / 57″ | Width of the bed: 12 ″ | Spindle nose: ASA A2-6 | Hole through the spindle: 2....

CNL 1740

Characteristics: CNL 1740 | I turn over the bench: 17″ | Turning on the cross slide: 10-7/8″ | Distance between points: 37″ | Width of the bed: 12 ″ | Spindle nose: Camlock D1-6 (Opt. ASA A1-6) | Hole through the...

CHL 21 SERIES

Characteristics: CHL 21 SERIES | I turn over the bench: 20.98″ | Turning on the cross slide: 11.8″ | Distance between points: 33.2″ / 112″ | Width of the bed: 13.58″ | Spindle nose: D1-8 or ASA A2-6 | Hole throug...

KVT 75E

Características: KVT 75E | Diámetro máximo de giro: 29.5 | Longitud máxima de giro: 23.6 | Diámetro máximo de vuelco: 33.4 | Nariz del husillo: A2-11

KLM 300LY

Características: KLM 300LY | Función de milling y torneado: SI | Diámetro máximo de giro: 18.5 | Longitud máxima de giro: 44.8 | Husillo agujero pasante: 2,95 | Chuck: 10

KLM 300SY

Características: KLM 300SY | Función de milling y torneado: SI | Diámetro máximo de giro: 18.5 / 14.8 | Longitud máxima de giro: 24.2 / 24.2 | Husillo agujero pasante: 2,95 | Chuck: 10

KLR 360

CTL 618EVS

Characteristics: CTL 618EVS | I turn over the bench: 11″ | Turning on the cross slide: 6″ | I turn over the neckline: 9″ | Width of the bed: 6 - 3/4″ | Distance between points: 18″ | Cross travel: 6″ | Auxiliary ...