Usado cnc

TORNO CNC Mori Seiki CL 20

• Fabricante: Mori Seiki
• Modelo: CL-20

KVT 55E

Características: KVT 55E | Diámetro máximo de giro: 21.6 | Longitud máxima de giro: 19.7 | Diámetro máximo de vuelco: 29.5 | Nariz del husillo: A2-11

KVR 320X202

KLM 200SM

Características: KLM 200SM | husillo secundario: SI | Diámetro máximo de giro: 11.3 | Longitud máxima de giro: 19.5 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secund...

KLM 300SM

Características: KLM 300SM | husillo secundario: SI | Diámetro máximo de giro: 16.5 | Longitud máxima de giro: 24 | Agujero pasante del husillo (principal / secundario): 2.04 / 1.77 | Silla (principal / secundar...

KLR 200

Characteristics: KLR 200 | Maximum turning diameter: 13.8 | Maximum turning length: 22.4/39.4 | Spindle through hole: 2.44 | Chuck: 8.26

HL 44

Characteristics: HL 44 | I turn over the bench: 44��� | Turning on the cross slide: 17.3��� | I turn over the neckline: 61��� | Width of the bed: 24��� | Distance between points: 120��� (Opt 80��� / 160��� / 200�...

HW 26

Characteristics: HW 26 | I turn over the bench: 26��� | Turning on the cross slide: 17.3��� | I turn over the neckline: 35��� | Width of the bed: 15.75��� | Distance between points: 80��� (OR 120��� / 160���) | C...

ML 2060T

Characteristics: ML 2060T | I turn over the bench: 20��� | Turning on the cross slide: 14��� | I turn over the neckline: 27.5��� | Width of the bed: 12��� | Distance between points: 57��� | Cross travel: 12��� | ...

KLS 1760II

Characteristics: KLS 1760II | I turn over the bench: 17��� | Turning on the cross slide: 10.2��� | I turn over the neckline: 22��� | Width of the bed: 12 ��� 1/4��� | Distance between points: 60��� | Cross travel...

Tor CNC HARDINGE Modelo SV-1500

• Fabricante: Hardinge

Torno CNC HITACHI SEIKI HITEC- TURN 23SII

• Fabricante: Hitachi Seiki
• Modelo: Hitec-Turn

1 Torno CNC Millano BNC-20T ( 2 Husillos )