AJA OG-C10DA Analog Video 1x9 openGear Distribution Amplifier en Londres, Inglaterra, Reino Unido

Especificaciones

Condición
nuevo
Número de stock
OG-C10DA-R0
Termination
75 Ohms or nonterminated
Video bandwidth
0 – 6 MHz +/- 0.1dB
Gain
-3dB, -2dB, -1dB, 0dB, +1dB, +2dB, or +3dB, +/- 0.3dB
Diff gain
0.15%, not load dependent
Diff phase
0.1 degree, not load dependent
H/v tilt
< 0.1%
Response variation
< 0.1dB 1 to 9 loads
Coupling
DC
Max common mode signal
8Vp-p
Return loss
> 15dB to 6 MHz all inputs and outputs
Output isolation
>40dB
Safe operating temperature range
0C to 40C (32F to 104F)
Safe storage temperature range (power off)
-40C to 60C (-40F to 140F)
Operating relative humidity
10-90% noncondensing
Operating altitude
<3,000m (<10,000ft)
Subcategoría
Video
Subcategoría 2
Studio
Subcategoría 3
Opengear converters
Subcategoría 4
Broadcast converters
ID de Anuncio
98277151

Descripción

Analog Video 1x9 openGear Distribution Amplifier
The OG-C10DA is an openGear 1x9 analog distribution amplifier with support for NTSC and PAL, offering the ability to distribute multiple copies of the incoming signal or extend composite video content with gain adjustment to compensate for long cable runs.
The OG-C10DA can also be used to distribute tri-level sync in an HD facility when a sync signal is fed externally into the Video Input.
1x9 analog distribution amplifier, (1x loop out option)
Supports analog NTSC, PAL, blackburst, or tri-level sync

Supports AES3-id (digital unbalanced audio) and LTC
Selectable input - external BNC, frame input Ref 1 or frame input Ref 2
Monitor and control via Ross DashBoard software
DIP switches for local control (Loop, Ref In, Termination, and Gain)
Input Present LED
Power: 6.75 watts max per card
Hot-swappable
Compatible with OG-X-FR, OG-3-FR and DFR-8321 openGear frames
Five year warranty

$549 USD

Fabricante
N/A
Ubicación
🇬🇧 Londres, Inglaterra, Reino Unido

¿Le interesa esta máquina?

Capacidad de respuesta del vendedor:

5.0