6ES7675-3AG30-0PA0 SIMATIC MICROBOX 420-T en Shenzhen, Guangdong, China
Nuevo
Especificaciones
- Condición
- nuevo
- Artikelnummer
- 6ES7675-3AG30-0PA0
- Hardware product version
- V1
- Firmware version
- V1.0
- Computer platform
- Microbox PC 420
- Processor selection
- Pentium III 933 MHz
- Main memory
- 512 Mbyte RAM
- Compact flash
- 1 Gbyte
- Operating systems
- Windows XP Embedded
- Control
- WinAC T V1.0
- Communication
- Softnet PG for IE/Simatic Net 2005 V3.0.1
- Rated value, 24 v dc
- Yes
- Permissible range, lower limit (dc)
- 20.4 V
- Permissible range, upper limit (dc)
- 28.8 V
- Mains/voltage failure stored energy time
- 5 ms
- Rated value at 24 v dc
- 2 500 mA
- Power consumption, max.
- 61 W
- Backup time, max.
- 5 y
- For bit operations, typ.
- 0.004 µs
- For fixed point arithmetic, typ.
- 0.003 µs
- For floating point arithmetic, typ.
- 0.004 µs
- Number, max.
- 65 535
- Size, max.
- 64 kbyte
- Number of free cycle obs
- 1
- Number of time alarm obs
- 1
- Number of delay alarm obs
- 1
- Number of time interrupt obs
- 9
- Number of process alarm obs
- 1
- Number of startup obs
- 1
- Number of asynchronous error obs
- 7
- Number of synchronous error obs
- 2
- Number of diagnostic alarm obs
- 1
- Per priority class
- 24
- Additional within an error ob
- 2
- Number
- 8
- Can be set
- Yes
- Lower limit
- 1 ms
- Upper limit
- 6 000 ms
- Preset
- 6 000 ms
- Present
- Yes
- Retentive data area, total
- 30 KB
- Retentive data area in total (incl. times, counters, flags), max.
- 30 kbyte
- Number of clock memories
- 8
- Retentivity adjustable
- Yes
- Retentivity preset
- Yes
- Adjustable, max.
- 16 kbyte
- Inputs
- 2 048 byte
- Outputs
- 2 048 byte
- Inputs, adjustable
- 2 048 kbyte
- Outputs, adjustable
- 2 048 kbyte
- Inputs, default
- 512 byte
- Outputs, default
- 512 byte
- Number of subprocess images, max.
- 15
- Inputs, of which central
- 0
- Outputs, of which central
- 0
- Address space per module, max.
- 244 byte
- Hardware clock (real-time clock)
- Yes
- Deviation per day, max.
- 5 s
- Backup time
- 5 y
- Number/number range
- 0 to 7
- Range of values
- 32767
- Granularity
- 1 hour
- Retentive
- Yes
- Supported
- Yes
- To pc-cp, slave
- No
- To mpi, master
- No
- To mpi, slave
- No
- In as, master
- No
- In as, slave
- No
- On ethernet via ntp
- No
- Integrated channels (di)
- 0
- Number of digital outputs
- 8
- Of which high-speed outputs
- 8
- Integrated channels (do)
- 8
- Functions
- For technology functions, e.g. high-speed cam switch signals
- Short-circuit protection
- Yes
- Lamp load, max.
- 5 W
- For signal "0", max.
- 3 V
- For signal "1" rated value
- 0.5 A
- For signal "1" permissible range, min.
- 5 mA
- For signal "1" permissible range, max.
- 0.6 A
- For increased power
- No
- For redundant control of a load
- No
- With resistive load, max.
- 100 Hz
- With inductive load, max.
- 0.2 Hz
- On lamp load, max.
- 10 Hz
- Cable length, shielded, max.
- 25 m
- Cable length unshielded, max.
- 25 m
- Integrated channels (ai)
- 0
- Integrated channels (ao)
- 0
- Usb port
- 2xUSB 2.0 high curr./2xUSB 2.0 low curr.
- Serial interface
- COM1 (RS232)
- Graphics interface
- DVI VGA / DVI integrated
- Industrial ethernet interface
- 2x VUA VT6105L OM/VT6106S, 10/100 Mbit/s with RJ45
- Physics
- RS 485
- Isolated
- Yes
- Mpi
- No
- Dp slave
- No
- Point-to-point connection
- No
- Number of connections, max.
- 0
- Transmission rate, max.
- 12 Mbit/s
- Number of dp slaves, max.
- 32
- Pg/op communication
- Yes
- Routing
- Yes
- S7 communication, as client
- No
- S7 communication, as server
- No
- Equidistance mode support
- Yes
- Sync/freeze
- No
- Activation/deactivation of dp slaves
- No
- Direct data exchange (slave-to-slave communication)
- No
- Dpv1
- Yes
- User data per dp slave, max.
- 244 byte
- Inputs, max.
- 244 byte
- Outputs, max.
- 244 byte
- Automatic detection of transmission speed
- Yes
- Profinet io controller
- No
- Profinet cba
- No
- As server
- Yes
- As client
- Yes
- User data per job, max.
- 64 kbyte
- Number of login stations for message functions, max.
- 32
- Process diagnostic messages
- Yes
- Simultaneously active alarm-s blocks, max.
- 200
- Status block
- Yes
- Single step
- Yes
- Number of breakpoints
- 20
- Status/control variable
- Yes
- Variables
- E/A/M/DB/Z/T
- Forcing
- No
- Number of entries, max.
- 120
- Alarms
- No
- Diagnostic functions
- No
- Status indicator digital output (green)
- No
- Status indicator digital input (green)
- No
- Ip20
- Yes
- Ce mark
- Yes
- Csa approval
- Yes
- Culus
- Yes
- Rcm (formerly c-tick)
- Yes
- Fm approval
- No
- Min.
- -20 °C
- Max.
- 60 °C
- Operation, checked according to iec 60068-2-6
- Yes; 10 to 58 Hz: Amplitude 0.075 mm; 58 to 500 Hz: Acceleration 9.8 m/s2
- Transport tested checked to iec 60068-2-6
- Yes; 5 to 9 Hz: 3.5 mm; 9 to 500 Hz: 9.8 m/s2
- Checked according to iec 60068-2-27
- Yes; 150 m/s2, 11 ms;
- Checked according to iec 60068-2-29
- Yes; 150 m/s2, 11 ms;
- Operation, checked according to iec 60068-2-29
- Yes; 150 m/s2, 11 ms;
- Step 7
- Yes; Step 7 V5.3 SP3 or higher and S7-Technology option package V3.0 SP1
- Command set
- see instruction list
- Nesting levels
- 8
- System functions (sfc)
- See manual
- System function blocks (sfb)
- See manual
- Lad
- Yes
- Fbd
- Yes
- Stl
- Yes
- Scl
- Yes
- Cfc
- Yes
- Graph
- Yes
- Higraph®
- Yes
- Process diagnostics
- Yes
- Software controller
- Yes
- User program protection/password protection
- Yes
- Number of technology objects, total
- 64
- Of which axes
- 32
- Of which output cams
- 32
- Of which cam disks
- 32
- Number of probes
- 16
- Number of external encoders
- 16
- Width
- 262 mm
- Height
- 133 mm
- Depth
- 65 mm
- Last modified:
- 14.10.2014
- Subcategoría
- Plc
- Subcategoría 2
- Siemens plc all
- Subcategoría 3
- C7/rack pc,box pc
- ID de Anuncio
- 97968794
Descripción
SIEMENS C7/RACK PC,BOX PC 6ES76753AG300PA0 SIMATIC MICROBOX 420-T,,WITH SIMATIC WINAC RTX 2005,AND SIMATIC SOFTNET PG, WITH,TECHNOLOGY/MOTION CONTROL-FUNC.,INSTALLED READY TO RUN ON,MICROBOX PC420 WITH,PIII 933 MHZ, PROFIBUS DP,,512 MB RAM, 1 GB CF-CARD,