KINGSINE EngyBrick Distributed Intelligent Power Monitoring Module en Shenzhen, Guangdong, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Module
- Module+CT
- Measurement
- I1, I2, I3, P, Q, S, PF, f
- Power supply
- 24V Centralize Bus Power supply
- Module type
- EBI12 module
- Max/min. value
- I, ΣP, ΣQ, ΣS, ΣPF, THD I
- Current transformer
- 5A, 50A, 200A, 400A, 600A, 800A, 1000A……
- Measurement characteristics
- Accuracy
- Active energy
- 0.5 %
- Reactive energy
- 1.0 %
- Apparent energy
- 0.5 %
- Active power
- 0.5 %
- Reactive power
- 1.0 %
- Apparent power
- 1.0 %
- Power factor
- 0.5 %
- Voltage measurement
- 50-300VAC(ph/N)87-520VAC(ph-ph)
- Current measurement
- 0.2 %
- Voltage harmonics
- ±0.5 %
- Current harmonics
- ±0.5 %
- Frequency
- 0.05Hz
- Measure type
- Single phase/Three phase four wires/Three phase three wires
- Frequency measurement
- 45-65Hz
- Modules wire cable
- RJ45 net cable, Use 586 line order
- Protocol
- ModBus RTU
- Speed rate
- 1200-115200 band-rate
- Installation method
- Din-rail or back side installation
- Protection level
- IP40
- Size
- 64.2mm*89.3mm*18mm
- 1
- Working temp.：-25℃ ~ +70℃
- 2
- Storage temp.：-40℃ ~ +85℃
- 3
- Humidity：5% ~ 95%RH, No condense
- 4
- Devices should be installed in suitable electrc isolated and fireproof boxes
- Subcategoría
- Power meter
- ID de Anuncio
- 94451662
Descripción
EngyBrick System is about smart power distribution modules solution, which are dedicated to assisting clients improving their working efficiency and greatly reducing their asset purchase budget and installation cost, providing users the best convenient installation mode and the best time-saving commissioning mode. The system consist of communication signal acquisition&voltage monitoring, current monitoring two parts. The system adopt independent bus power supply mode, RJ45 port connecting with each component modules. Its commissioning adopts one-key mode for address configuration in the field. It also can configure the parameters and the module working mode via the display screen.
Advantage
● Modular design, Din-rail installation, suit for compact and dense distribution transformation installation environment.
● Current transformer use external connection mode(Split core or Non-split core optional), convenient for maintain.