KINGSINE KF86P Universal Relay Test Set en Shenzhen, Guangdong, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Amplitude & power
- 6×350V @ 100W max3×700V @ 150W max
- Accuracy
- <0.02% rg Typ. <0.05% rg Guar.
- Range
- 8 ~ 60Vdc (Max Load Current 1.16A) Accuracy＜2%60 ~ 120Vdc (Max Load Current 0.58A) Accuracy＜1%120 ~ 350Vdc (Max Load Current 0.2A) Accuracy＜0.5%
- Dc offset
- <10mV Typ./ <60mV Guar
- Resolution
- 250µV
- Distortion
- <0.015%Typ. / <0.05% Guar.
- Ascends/descent response
- <100us
- Frequency range
- DC～1.0kHz, transient 3KHz
- Frequency accuracy
- 0.002%（Normal frequency）
- Frequency resolution
- 0.001Hz
- Phase range
- 0～359.9°
- Phase accuracy
- <0.02°，50/60Hz
- Phase resolution
- ±0.001°
- Power
- >69W max
- Protection
- Short-circuit protection
- Overload protection
- Yes
- Isolation
- Isolated from other terminal
- Electrical isolation
- All pairs isolated
- Input impedance
- 15 ohm
- Input feature
- 0 V～300Vdc Or dry contactBinary 1-4 threshold can be set, binary 5-10 isolate every two pairs(Binary input turn over potential can be programmable)
- Sampling rate
- 10kHz
- Time resolution
- 10us
- Time measurement range
- infinity
- Time accuracy
- ±1ms @ <1s ±0.1% @ ≥1s
- Debounce time
- 0~25ms (Software controlled)
- Ac break capacity
- Vmax: 250V（AC）/ Imax: 0.5A
- Dc break capacity
- Vmax: 250V（DC）/ Imax: 0.5A
- Satellite synchronization
- 1 × SMA, Use for GPS antenna interfaceSupport GPS and Beidou Satellite
- Fiber irig-b
- 2 × ST, 1 for transmission, 1 for receiving
- Electric irig-b
- 1 × 6Pin 5.08mm phoenix terminal1 for transmission, 1 for receiving
- External trigger synchronization
- 1 × 4Pin 5.08mm phoenix terminalexternal trigger input + external trigger output
- Sync error
- <10us
- Ethernet
- 2 × RJ45, 10/100M
- Wifi
- Inbuilt WIFI DHCP service
- Serial port
- 1 × RS232
- Usb
- 2 × USB2
- Size
- 390mm×256mm×140mm
- Weight
- 10kg
- Display
- 13.3 inch LCD, touch screen
- Nominal voltage
- 220V/110V (AC)
- Allowable voltage
- 85 - 265 VAC; 127V～350V(DC)
- Nominal frequency
- 50Hz
- Allowable frequency
- 47-63Hz
- Current
- 10A@220V, 16A@110V
- Power consumption
- 1200VA max
- Connection type
- Standard AC socket 60320
- Operating temperature
- -10～+55 ℃
- Relative humidity
- 5～95%, Non-condensation
- Storage temperature
- -20℃ ~ +70℃
- Atmospheric pressure
- 80kPa～110 kPa（altitude 2000m or lower）
- Port number
- 8 Pairs
- Cable model
- 62.5/125μm(Multiple-mode fiber, orange)
- Wave length
- 1310nm
- Transmission distance
- > 1Km
- Status indication
- SPD Green (lights): active connectionLink\Act Yellow (blinking): data exchange
- Output channels
- 10 channels, 8 Voltage outputs + 2 Current outputs
- Output port type
- Phoenix terminal
- Output range
- 8x0~8Vrms; 2x0~20mA
- Harmonic(thd%)
- < 0.05% Typ. / <0.1% Guar.
- Max input
- 600mA
- Sensor usage
- Mechanical meters / Electronic meters
- Sensor output
- High lever:>4.5V, Low level:<0.2V
- Pulse input
- 1 pulse input port, 5Vdc high level valid only.
- Pulse range
- 500KHz pulse input Max.
- Pulse output
- 1 Transistor output, Open-collector, 5Vdc/5mA
- Item no.
- 203112
- Goal
- Complete after-sales within 20 working days.
- Subcategoría
- Iec61850 digital substation testing
- ID de Anuncio
- 94451574
Descripción
The world's lightest & high power secondary injection test kit for universal substation testing.
● 6x35A@425VA max & 6x310V@105VA max analog outputs.
● 10kg weight, easy carry on flight journey.
● Low-level signals output, energy meter testing, transducer calibration, and IEC61850 testing capability for optional.
If you want to know more about Kingsine
substation testing equipment
, please do not hesitate to contact us!
Basic Functions
The Kingsine KF86P universal relay test kit marks a multipurpose, light-weight, field portable secondary injection test kit. It is capable of testing a wide variety of electro-mechanical, solid state, and microprocessor based protective relays, motor overload relays, IEC61850 testing, and similar protective devices.
12 Analog Channels outputs, 6x35A & 6x310V, Each output channels are independent and simultaneous control of magnitude, Phase angle and frequency values, able to inject DC, AC sine wave and up to 60x harmonics.