KINGSINE KF85P Universal Relay Test Set en Shenzhen, Guangdong, China

Especificaciones

Condición
nuevo
Amplitude & power
6×350V @ 100W max3×700V @ 150W max
Accuracy
Accuracy <0.05% rg Typ. <0.02% rg Guar.
Range
8 ~ 60Vdc (Max Load Current 1.16A)  Accuracy<2%60 ~ 120Vdc (Max Load Current 0.58A)  Accuracy<1%120 ~ 350Vdc (Max Load Current 0.2A)  Accuracy<0.5%
Dc offset
<10mV Typ./ <60mV Guar
Resolution
250µV
Distortion
<0.015%Typ. / <0.05% Guar.
Ascends/descent response
<100us
Frequency range
DC~1.0kHz, transient 3KHz
Frequency accuracy
0.002%(Normal frequency)
Frequency resolution
0.001Hz
Phase range
0~359.9°
Phase accuracy
<0.02°,50/60Hz
Phase resolution
±0.001°
Power
>69W max
Protection
Short-circuit protection
Overload protection
Yes
Isolation
Isolated from other terminal
Electrical isolation
All pairs isolated
Input impedance
15 ohm
Input feature
0 V~300Vdc Or dry contactBinary 1-4 threshold can be set, binary 5-10 isolate every two pairs(Binary input turn over potential can be programmable)
Sampling rate
10kHz
Time resolution
10us
Time measurement range
infinity
Time accuracy
±1ms @ <1s      ±0.1% @ ≥1s
Debounce time
0~25ms (Software controlled)
Ac break capacity
Vmax:250V(AC)/ Imax:0.5A
Dc break capacity
Vmax:250V(DC)/ Imax:0.5A
Satellite synchronization
1 × SMA, Use for GPS antenna interfaceSupport GPS and Beidou Satellite
Fiber irig-b
2 × ST, 1 for transmission, 1 for receiving
Electric irig-b
1 × 6Pin 5.08mm phoenix terminal1 for transmission, 1 for receiving
External trigger synchronization
1 × 4Pin 5.08mm phoenix terminalexternal trigger input + external trigger output
Sync error
<10us
Ethernet
2 × RJ45, 10/100M
Wifi
Inbuilt WIFI DHCP service
Serial port
1 × RS232
Usb
2 × USB2
Size
390mm×256mm×140mm
Weight
10kg
Nominal voltage
220V/110V (AC)
Allowable voltage
85 - 265 VAC; 127V~350V(DC)
Nominal frequency
50Hz
Allowable frequency
47-63Hz
Current
10A@220V, 16A@110V
Power consumption
1200VA max
Connection type
Standard AC socket 60320
Operating temperature
-10~+55 ℃
Relative humidity
5~95%, Non-condensation
Storage temperature
-20℃ ~ +70℃
Atmospheric pressure
80kPa~110 kPa(altitude 2000m or lower)
Port number
8 Pairs
Cable model
62.5/125μm(Multiple-mode fiber, orange)
Wave length
1310nm
Transmission distance
> 1Km
Status indication
SPD Green (lights): active connectionLink\AcT Yellow (blinking): data exchange
Output channels
10 channels, 8 Voltage outputs + 2 Current outputs
Output port type
Phoenix terminal
Output range
8x0~8Vrms; 2x0~20mA
Harmonic(thd%)
< 0.05% Typ. / <0.1% Guar.
Max input
600mA
Sensor usage
Mechanical meters / Electronic meters
Sensor output
High lever: >4.5V, Low level: <0.2V
Pulse input
1 pulse input port, 5Vdc high level valid only.
Pulse range
500KHz pulse input Max.
Pulse output
1 Transistor output, Open-collector, 5Vdc/5mA
Item no.
203034
ID de Anuncio
94451566

Descripción

The world's lightest & high power universal relay test set
● 6x35A@425VA max & 6x310V@105VA max analog outputs.
● 10kg weight, easy carry on flight journey.
● Low-level signals output, energy meter testing, transducer calibration and IEC61850 testing capability for optional.
Feel free to reach out for a quote on Kingsine's advanced

numerical relay testing
equipment!
Basic Functions
The Kingsine KF85P is a multipurpose, light-weight, field portable test set, it capable of testing a wide variety of electro-mechanical, solid state and microprocessor based protective relays, motor overload relays, IEC61850 testing, and similar protective devices.
12 Analog Channels outputs, 6x35A & 6x310V, Each output channels are independent and simultaneous control of magnitude, Phase angle and frequency values, able to inject DC, AC sine wave and up to 60x harmonics.
Lightweight, <10kg, easy carry on flight journey.
Variable battery simulator, 24~350Vdc, 70Watts max output.

Contactar al vendedor

Fabricante
Kingsine
Tipo
Conectores
Ubicación
🇨🇳 Shenzhen, Guangdong, China

¿Le interesa esta máquina?

Capacidad de respuesta del vendedor:

5.0