FULLY-AUTOMATED CYCLIC TRIXIAL SYSTEM (LoadTrac II, FlowTrac II Cyclic) en Alberton, Gauteng, Sudáfrica
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Número de stock
- LoadTrac II FlowTrac II Cyclic
- Standards
- ASTM D-3999 Determination of the Modulus Properties ASTM D-5311 Load Controlled Cyclic Triaxial Testing of Soils
- Cyclic loading system
- High performance custom linear actuator 1.8kW peak, low inertia servo-drive system for fast response time. High resolution feedback system for precise and accurate control of load and speed. 4.4 kN (1000lbs force) continuous load at speeds in excess of 200 mm (8″) /sec Self-contained and maintenance free Single Phase 208 VAC/60Hz (US) / 220VAC/50Hz (international)
- Type of cyclic loading
- Load controlled sinusoidal shape
- Cyclic rate
- Up to 10 Hz
- Options to end test
- Maximum number of cycles Maximum strain
- Reporting options
- Load, displacement, sample, and cell vs. cycle number, Shear stress, strain, p-p strain, excess pore pressure vs. cycle number, Shear stress vs. axial strain, Shear stress vs. normal stress, Automatic or user specified scaling on any of above plots, plotting to monitor, printer, plotter, or file
- Test cell
- Modified triaxial cell with accessories
- Unit systems
- U.S., English, metric and SI changeable at any time before, during and after test
- Sample diameter
- 50, 70, up to 100 mm (2/2.8/4 inches) Custom sizes by special order
- Transducers
- Force: 2, 5,10 kN (500, 1000, 2500 lbf.) Displacement: 50mm (2.0 in.) range Cell and sample pressures: 0-1400 kPa (0-200 psi)
- Categoría
- Prueba de materiales en Sudáfrica
- Subcategoría
- Soil
- ID de Anuncio
- 91070450
Descripción
Advanced Soil Systems
ASTM D-3999 Determination of the Modulus Properties
ASTM D-5311 Load Controlled Cyclic Triaxial Testing of Soils
The LoadTrac II/FlowTrac II Cyclic system automated test unit completely automates cyclic triaxial testing of soils.
Minimum mantime is required.
The LoadTrac II/FlowTrac-II Cyclic consists of a triaxial cell to retain the sample, a load frame with computer controlled platen for static loading, two computer controlled flow pumps to control chamber pressure and back pressure, a high performance linear actuator servo control actuator for cyclic loading with update rates of 500 times per second, a micro-processor for accurately controlling cyclic loading, a PC with a Pentium processor to control the test, and to log test data.
Editing and reporting is built-in to the test and control software program.
The unit arrives in a completely self-contained system with all necessary equipment.
The LoadTrac II/FlowTrac II Cyclic system is menu driven.