EN 12390-4 – EN 772-1 Automatic Compression Testing Machines with Welded Walls for Masonry Units, Cubes and Cylinders (UTC-5729.FPR) en Alberton, Gauteng, Sudáfrica
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Número de stock
- UTC-5729.FPR
- Normas
- EN 12390-4, EN 772-1
- Utc-5729.fpr
- Cuadro de ensayo de compresión de 2000 kN para unidades de mampostería, cubos y cilindros, EN
- Utc-5739.fpr
- Cuadro de ensayo de compresión de 3000 kN para unidades de mampostería, cubos y cilindros, EN
- Utc-0210
- Transductor de Presión de Alta Precisión y Electrónico
- Utc-4682
- Pedestal para marcos de ensayo de compresión de 2000 kN y 3000 kN con paredes soldadas
- Modelos
- UTC-5729.FPR
- Capacidad
- 2000 kN
- Tipo de bastidor
- Acero soldado
- Bloque de cojinete inferior, dimensiones (d)
- 310x510x50 mm
- Bloque de cojinete superior, (con conjunto de asiento esférico) dimensiones (c)
- 310x510x50 mm
- Dureza de la superficie de los bloques de cojinete
- 55 HRC
- Tolerancia de planitud
- 0,03 mm
- Diámetro del pistón
- 250 mm
- Carrera del pistón
- 50 mm
- Altura máxima libre entre bloques de rodamientos (e)
- 350 mm
- Libre horizontal (b)
- 360 mm
- Tamaños de especímenes para cilindros (hasta)
- Ø160×320 mm
- Tamaños de especímenes para cubos (hasta)
- 300 mm (**)
- Tamaños de especímenes para unidades de mampostería (hasta)
- 300×500 mm (**)
- Dimensiones (ancha x larga x alto) (axd*xf)
- 820x550x1145 mm
- Peso
- 965 kg
- Pedestal (opcional)
- UTC-4682
- Categoría
- Prueba de materiales en Sudáfrica
- Subcategoría
- Concrete
- Subcategoría 2
- Automatic - en compression testing machines
- ID de Anuncio
- 91070113
Descripción
AUTOMATIC Compression Testing Machines
Product Codes:
Description:
UTC-5729.FPR and UTC-5739.FPR models Automatic compression Testing Machines are manufactured for compression testing of masonry units, cubes and cylinders acc. to EN standards.
These machines also meet the requirements of CE norms with respect to the health and safety of the operator.
The machines allow inexperienced operators to perform the test.
Once the machine has been switched on and the specimen is positioned and centred by the help of fixtures or/and concentric centring lines of lower loading platen, the only required operations are;
Setting test parameters, including pace rate (only required when the specimen type is changed).
Pressing the START button on the control unit.
The machine automatically starts the rapid approach, when the specimen touches the upper platen the rapid approach is ended and starts loading at the pace rate that selected by user and stops once the specimen fails.