6ES7332-5TB00-0AB0 SIMATIC DP, HART ANALOG OUTPUT en Shenzhen, Guangdong, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- SIMATIC DP, HART ANALOG OUTPUT SM 332, 2AO, 0/4 - 20MA HART, FOR ET200M WITH IM153-2, 20 PIN
- Rated value (dc)
- 24 V
- Reverse polarity protection
- Yes
- From backplane bus 5 v dc, max.
- 100 mA
- From supply voltage l , max.
- 150 mA
- Power loss, typ.
- 3.5 W
- Number of analog outputs
- 2
- Voltage output, short-circuit protection
- Yes
- Current output, no-load voltage, max.
- 19 V
- Cycle time (all channels) max.
- 5 ms
- 0 to 20 ma
- Yes
- 4 to 20 ma
- Yes
- For current output two-wire connection
- Yes
- With current outputs, max.
- 650 Ω
- With current outputs, inductive load, max.
- 7.5 mH
- Voltages at the outputs towards mana
- max. 17 V / -0.5 V
- Current, max.
- 60 mA / -1 A
- Cable length, shielded, max.
- 400 m
- Resolution with overrange (bit including sign), max.
- 12 bit; Output value; 8 bit ( sign) read back value
- Conversion time (per channel)
- 40 ms
- For resistive load
- 2.5 ms
- For capacitive load
- 4 ms
- For inductive load
- 2.5 ms
- Output ripple (based on output area, bandwidth 0 to 50 khz), ( /-)
- 0.02 %
- Linearity error (relative to output range), ( /-)
- 0.03 %
- Temperature error (relative to output range), ( /-)
- 0.01 %/K
- Crosstalk between the outputs, min.
- 130 dB
- Repeat accuracy in steady state at 25 °c (relative to output area), ( /-)
- 0.0050 %
- Current, relative to output area, ( /-)
- 0.15 %
- Substitute values connectable
- Yes; Parameterizable
- Diagnostic alarm
- Yes; Parameterizable
- Diagnostic functions
- Yes; Parameterizable
- Diagnostic information readable
- Yes
- Diagnostics
- Yes
- Overrange
- Yes
- Wire break
- Yes; as of output value ＞ 0.5 mA
- Wire break in actuator cable
- Yes
- Hart communication active
- Yes; green LED (H)
- Group error sf (red)
- Yes; Additional group message per channel
- Channel error indicator f (red)
- Yes; per channel
- Module for ex(i) protection
- Yes
- Co (permissible external capacity), max.
- 230 nF
- Io (short-circuit current), max.
- 66 mA
- Lo (permissible external inductivity), max.
- 7.5 mH
- Po (power of load), max.
- 506 mW
- Uo (output no-load voltage), max.
- 19 V
- Um (fault voltage), max.
- 60 V; DC
- Ta (permissible ambient temperature), max.
- 60 °C
- Between the channels and backplane bus
- Yes
- Galvanic isolation analog outputs
- Yes
- Between the channels
- Yes
- Between the channels and the load voltage l
- Yes
- Between the outputs (ucm)
- 60V DC/30V AC
- Between m internally and the outputs
- 60V DC/30V AC
- Channels against backplane bus and load voltage l
- 1500 V AC
- Channels among one another
- 1500 V AC
- Load voltage l against backplane bus
- 500 V DC
- Fm approval
- Available soon
- Type of protection acc. to en 50020 (cenelec)
- [EEx ib] IIC
- Type of protection acc. to fm
- Class I, Division 2, Group A, B, C, D T4; Class I, Zone 2, Group IIC T4
- Test number kema
- 97 ATEX 2359 X
- Type of protection acc. to kema
- II3 (2) G Eex nA [ib] IIC T4
- Width
- 40 mm
- Height
- 125 mm
- Depth
- 120 mm
- Weight, approx.
- 280 g
- Subcategoría
- Plc
- Subcategoría 2
- S7-300
- Subcategoría 3
- Siemens plc all
- ID de Anuncio
- 88365427
Descripción
SIEMENS S7-300 6ES73325TB000AB0 SIMATIC DP, HART ANALOG OUTPUT,SM 332, 2AO, 0/4 - 20MA HART,,FOR ET200M WITH IM153-2, 20 PINSIMATIC DP, HART ANALOGAUSGABE,,SM 332, 2AA, 0/4 - 20MA HART,,FUER ET200M MIT ANSCHALTUNG,IM 153-2, 20-POLIGSIMATIC DP, SORTIE ANAL