P18 100A voltage output 2M Hz bandwidth class 0.1 ac current clamp en Pekín, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Ratio
- 10001 or 20001 (customized)
- Accuracy class
- 0.1%, 0.2%
- Primary current
- 0-100A AC or 0-200A AC
- Secondary current
- 0-100mA AC or 0-200mA AC (customized)
- Secondary voltage
- 0-100mV AC, 0-1V AC or 0-5V AC (customized)
- Max. cont. input current
- 120A or 240A
- Load capacity
- ≤4Ω
- Over voltage category
- CAT III 600V
- Output signal (ac current)
- From 0 to 200mA ac at nominal input current
- Output signal (ac voltage)
- From 0 to 5V ac at nominal input current
- Frequency range
- 10Hz-2MHz
- Dielectric strength
- 3KV 50Hz/60Hz at 1minute
- Temperature range
- -40°C to +55°C
- Output
- 2.5 meter cable with D01 or BNC connector
- Max. voltage not insulated conductors
- 600V
- Standard
- EN 61010-1, EN 61010-2-032, IEC60044-1
- Installation
- Clamp type
- Output mode
- Lead output (2.5m, 5m or 10m)
- Dimensions (lxwxh)(mm)
- 52.5x137.5x28
- Weight (g)
- 400
- Holding wire diameter (mm)
- φ18
- Max. jaw opening (mm)
- 18
- Jaw color
- Red, yellow, blue, green, black
- Material
- PC+ABS, UL94 V0
- Categoría
- Pinzas amperimétricas en China
- Subcategoría
- Machinery
- Subcategoría 2
- Current probe
- ID de Anuncio
- 84813272
Descripción
The round jaw design on the P18 series ac current clamp along with the high content nickel metal core makes them well suited for power quality applications The round jaw design on the P18 series ac current clamp along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important.