S50 1200A 1mv/A and 1mA/A output AC current clamp on CT en Pekín, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Ratio
- 10001, 20001, 10005 (customized)
- Accuracy class
- 0.1%, 0.2%, 0.5%
- Primary current
- 0-500A AC and 0-1000A AC
- Signal output
- 1mV/A, 1mA/A
- Secondary voltage
- 0-0.5V AC and 0-1V AC.
- Secondary current
- 0-1A or 0-5A AC
- Max. cont. input current
- 1200A
- Load capacity
- ≤20Ω, standard 4Ω
- Over voltage category
- CAT III 600V
- Frequency range
- 10Hz-10MHz
- Dielectric strength
- 3KV 50Hz/60Hz at 1minute
- Temperature range
- -40°C to +55°C
- Output
- 2.5 meter cable with D01 or BNC connector
- Max. voltage not insulated conductors
- 720V
- Standard
- EN 61010-1, EN 61010-2-032, EN 61010-2-031IEC60044-1, & IEC61869-2, 600V CAT III
- Installation
- Clamp type
- Range
- 10A, 100A, 1000A optional
- Output mode
- Lead output (2.5m)
- Connector
- BNC, 4mm banana, signal cable (2 cores), customized
- 0-10a
- ≤0.5°
- 10-100
- ≤0.2°
- 10-1200a
- ≤0.1%
- 100-1200a
- ≤0.1°
- Dimensions (lxwxh)(mm)
- 105x218x30
- Weight (g)
- 650
- Holding wire diameter (mm)
- φ52
- Max. jaw opening (mm)
- 52
- Jaw color
- Red & grey
- Material
- PC+ABS, UL94 V0
- Categoría
- Pinzas amperimétricas en China
- Subcategoría
- Machinery
- Subcategoría 2
- Current probe
- ID de Anuncio
- 84813270
Descripción
The round jaw design on the S50 series AC current clamp on CT along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important from 10Hz to 10MHz. Measurement range is 1mA to 1200A.