Temperature Test Chambers en Shanghái, Shanghai, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Workspace volume(l)
- 100
- Workspace dimensions (mm)/width
- 450
- Deep
- 1160
- Height
- 1610
- External dimensions (mm)/width
- 1000
- Control model
- Balanced Temperature&Humidity Control System(BTHC system)
- Performance/temperature range （optional）
- A: 0~150℃ B:-20~150℃ C:-40~150℃ D:-60~150℃ E:-70~150℃
- Temperature fluctuation
- ≤ ± 0.5 ℃
- Temperature uniformity
- ≤ 2°C
- Temperature deviation
- ≤ ± 2°C
- Heating rate
- 1~3 °C/min
- Cooling rate
- 0.7~1 °C/min
- Humidity range
- 20~98% RH
- Humidity deviation
- ≤+2/-3%RH
- Construction/material/exterior
- A3 Steel board with powder coated
- Interior
- Mirror Stainless Steel-SUS#304
- Thermal insulation
- Glass fiber cotton or polyurethane foam
- Viewing window
- Tempered glasses with conducting film
- Air circulation/fan type
- Centrifugal Sirocco Fan
- Refrigeration/cooling method
- Single/Cascade refrigerating (air cooled)
- Compressor
- Hermetically
- Condenser
- Air Cooled-plate fins with fan
- Evaporator
- Fin with several segments
- Refrigerants
- Environmentally friendly
- Heating/heater type
- Nickel-chromium naked wire heating
- Humidifying system/humidifying method
- Shallow water bath with immersed stainless steel heater/sensor system to generate uniform humidity.
- Supplying water
- Electromagnetic pump
- Tank capacity
- 15L (Auto fill via pump)
- Control and sense system/controller
- 7" color touch-screen
- Timing range
- 1~9999 （H.M.S）adjustable
- Temp. sensor
- PT-100Ω Dry bulb
- Humidity sensor
- PT-100Ω Wet bulb
- Facility requriement/water
- Deionized/distilled water for topping up water tank
- Electricity supply
- 3 phase
- Operating environment conditions
- +5℃~ +28℃ ≤ 85%RH
- Categoría
- Cámaras climáticas en China
- Subcategoría
- Temperature chambers
- ID de Anuncio
- 63893711
Descripción
Temperature test chambers focus on the required temperature simulation test from 4 optional low temperature -70 °C; -60°C; -40°C; -20°C to high temperature 180 °C.
Note:
1.Chamber working room size could customize.
2.If test specimens have active load during test, please inform us.
3.This is temperature only model, if need make humidity test, please refer to humidity chambers.
Description
Temperature test chambers focus on the required temperature simulation test from 4 optional low temperature -70 °C; -60°C; -40°C; -20°C to high temperature 180 °C.
Chambers with Single-stage Refrigeration systems are capable of achieving workspace temperatures down to -20°C. This is fine for many commercial and industrial tests that require low temperatures of typically 0°C, -10°C or -20°C. A single-stage system uses one compressor to directly cool the workspace.
Chambers with Cascade Refrigeration systems are capable of achieving workspace temperatures down to -40°C~-70°C depending on model.