Linear rail of X/Y/Z axis, composite and intergrated machining center en Suzhou, Jiangsu, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Basic specification
- unit GV-1580 GV1890
- Strokes of axes x, y and z
- mm 1500×800×700 1800/900/800
- Nose of the spindle to the table surface
- mm 150-850 150-950
- Center of the spindle to the shield surface of axis z
- mm 840 935
- Table size
- mm 1600×800 2000×900
- Maximum load of the table
- kg 1800 2800
- Size of t-shaped slot (width * number of slots * interval)
- mm 22×7×110 22×7×125
- Revolving speed of spindle
- rpm 8000 6000
- Horsepower of spindle motor
- kw 18.5 15/18.5
- Taper of spindle
- BT-50（OptionalBT-40） BT-50
- Diameter of spindle
- mm 155/190 190
- Maximum feed rates of axes x, y and z
- m/min 20×20×20 20×20×20
- Repeated accuracy
- mm ±0.003 ±0.003
- Positioning accuracy
- mm ±0.005 ±0.005
- Form of tool changer
- Knife arm Knife arm
- Capacity of the tool magazine
- support 24 24
- Maximum tool diameter
- mm 105/200 105/200
- Maximum tool length
- mm 300 350
- Maximum tool weight
- kg 15 15
- Tool changing time (t-t)
- sec 3.8 3.8
- Pressure of air machine
- kgf/cm2 7 7
- Power demand
- KVA 35 40
- Net weight
- T 14 16
- Overall size (length * width*height)
- m 4×2.9×3.05 4.8X3.2X3.3
- Categoría
- Centros de mecanizado en China
- Subcategoría
- Vertical processing series
- ID de Anuncio
- 55956221
Descripción
Advantages of the product
This type of machine can be considered as the “Aircraft carrier” of the vertical machining center; the machine tool body weighs 14 tons which is not at the same level as those of common 1265 and 1370 type machine tools; four 45mm heavy-duty roller type guide rails are applied to Axis Y, thereby making the table very stable during large-area machining displacement, without easy deformation.
55mm super-wide guide rails with 6 huge sliding blocks are applied to the Axis X and Axis Z; in this way, the machining rigidity is greatly improved; therefore, the machine tool is able to cut anything.
Structure introduction of the machine tool body
Four guide rails are applied to this machine; specifically four 45mm guide rails are used on the Axis Y, and 55mm super-wide rails are used on the Axis X and Axis Z, and 6 sliding blocks are also taken;