Liner rail of X/Y/Z axis, composite and integrated horizontal machining center(High performance-price ratio en Suzhou, Jiangsu, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Basic specification
- unit GH-500 GH-630 GH-800 GH-1290
- Strokes of axes x, y and z
- mm 740×680×650 1050×750×900 1300×1000×1000 1200×900×700
- Nose of the spindle to the table surface
- mm 120-800 120-870 120-1120 70-970
- Center of the spindle to the shield surface of axis z
- mm 130-780 130-1030 200-1200 150-850
- Table size
- mm 500×600 630×700 800×800 1300×700
- Maximum load of the table
- kg 600 950 1500 1000
- Size of t-shaped slot (width * number of slots * interval)
- mm 24XM16Threaded hole 24XM16Threaded hole 24XM16Threaded hole 18×5×122
- Revolving speed of spindle
- rpm 6000 6000 6000 6000
- Horsepower of spindle motor
- kw 15/18.5 15/18.5 18.5/22 15/18.5
- Taper of spindle
- BT-50 BT-50 BT-50 BT-50
- Diameter of spindle
- mm 155/190 155/190 190 155/190
- Maximum feed rates of axes x, y and z
- m/min 20×20×20 20×20×20 20×20×20 20×20×20
- Repeated accuracy
- mm ±0.003 ±0.003 ±0.003 ±0.003
- Positioning accuracy
- mm ±0.005 ±0.005 ±0.005 ±0.005
- Form of tool changer
- Knife arm Knife arm Knife arm Knife arm
- Capacity of the tool magazine
- support 24 24 24 24
- Maximum tool diameter
- mm 105/200 105/200 105/200 105/200
- Maximum tool length
- mm 350 350 350 350
- Maximum tool weight
- kg 15 15 15 15
- Tool changing time (t-t)
- sec 6 6 6 7.5
- Pressure of air machine
- kgf/cm2 7 7 7 7
- Power demand
- KVA 35 35 40 35
- Net weight
- T 11 13 17 13
- Overall size (length * width*height)
- m 2.8×4.6×2.9 3.5X5X2.9 4.3X6.1X4 3.6×3.25×2.95
- Categoría
- Centros de mecanizado en China
- Subcategoría
- Horizontal processing series
- ID de Anuncio
- 55956218
Descripción
Introduction of product advantages
Adopt the international popular inverted T-shaped moving-column type and integral lathe bed structure. Reasonable ribs arrangement optimizes chips disposal structure, improves guide rail lubrication recovery system, and enhances the integral rigidity and appearance quality of castings.
The installation and support components (motor base and bearing base) of the three-axis feed system of the machine tool are completely guaranteed by mechanical processing, which greatly improves the assembly efficiency and quality, and enhances the accuracy consistency. (In the past, the adjusting pad under the joint surface of the motor base and the bearing base of the machine tool was manually adjusted, resulting in low assembly efficiency. Due to the uneven ability of assembly workers, the assembly quality is unstable, thus leading to the instability of machine tool precision.)
Introduction of lathe bed structure