Linear rail of X/Y/Z axis, composite and integrated machining center en Suzhou, Jiangsu, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Basic specification
- unit GV-1160
- Strokes of axes x, y and z
- mm 1100×600×600
- Nose of the spindle to the table surface
- mm 140-740
- Center of the spindle to the shield surface of axis z
- mm 630
- Table size
- mm 1200×600
- Maximum load of the table
- kg 1000
- Size of t-shaped slot (width * number of slots * interval)
- mm 18×5×100
- Revolving speed of spindle
- rpm 8000
- Horsepower of spindle motor
- kw 15
- Taper of spindle
- BT-40（OptionalBT-50）
- Diameter of spindle
- mm 150/155
- Maximum feed rates of axes x, y and z
- m/min 36×36×36
- Repeated accuracy
- mm ±0.003
- Positioning accuracy
- mm ±0.005
- Form of tool changer
- Knife arm
- Capacity of the tool magazine
- support 24
- Maximum tool diameter
- mm 80/150
- Maximum tool length
- mm 300
- Maximum tool weight
- kg 8
- Tool changing time (t-t)
- sec 1.8
- Pressure of air machine
- kgf/cm2 7
- Power demand
- KVA 25
- Net weight
- T 7
- Overall size (length * width*height)
- m 3.1×2.4×2.7
- Categoría
- Centros de mecanizado en China
- Subcategoría
- Vertical processing series
- ID de Anuncio
- 55956216
Descripción
A
dvantages of the product
The product has the machining range which is much greater than that of common 1m machine, and the rigidity is increased greatly at the same time. The high-power motor up to 15KW is taken as the spindle motor; with the adoption of the super-wide machine tool base, columns, 45mm three-axis heavy-duty roller type guide rails, and six sliding blocks on the Axis X and Axis Z, the rigidity requirements of the bearing axis is strengthened, and the machine tool can more effectively absorb vibration during heavy cut; and accordingly the accuracy and degree of finish of the workpiece are improved. Therefore, 1160 type machine is the perfect combination of high speed and high rigidity.
Structure introduction of the machine tool body
On the basis of common 1060 type machine, strengthened machining is implemented on a saddle of the table; 45mm heavy duty guide rails are applied to the guide rails of three axes;