Three-axis rail high-speed and high-accuracy machining central machine en Suzhou, Jiangsu, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Basic specification
- unit GV-1370
- Strokes of axes x, y and z
- mm 1300/700/700
- Nose of the spindle to the table surface
- mm 110-810
- Center of the spindle to the shield surface of axis z
- mm 740
- Table size
- mm 1400×700
- Maximum load of the table
- kg 1200
- Size of t-shaped slot (width * number of slots * interval)
- mm 18X5×110
- Revolving speed of spindle
- rpm 8000
- Horsepower of spindle motor
- kw 15
- Taper of spindle
- BT-40（OptionalBT-50）
- Diameter of spindle
- mm 150/155
- Maximum feed rates of axes x, y and z
- m/min 24X24X24
- Repeated accuracy
- mm ±0.003
- Positioning accuracy
- mm ±0.005
- Form of tool changer
- Knife arm
- Capacity of the tool magazine
- support 24
- Maximum tool diameter
- mm 80/150
- Maximum tool length
- mm 300
- Maximum tool weight
- kg 8
- Tool changing time (t-t)
- sec 1.8
- Pressure of air machine
- kgf/cm2 7
- Power demand
- KVA 30
- Net weight
- T 11
- Overall size (length * width*height)
- m 3.4×2.8×3
- Categoría
- Centros de mecanizado en China
- Subcategoría
- Vertical processing series
- ID de Anuncio
- 55956214
Descripción
Advantages of the product
This type of machine can be considered as the “Aircraft carrier” of the vertical machining center; the machine tool body weighs 13 tons which is not at the same level as those of common 1265 and 1370 type machine tools; four 45mm heavy-duty roller type guide rails are applied to Axis Y, thereby making the table very stable during large-area machining displacement, without easy deformation.
55mm super-wide guide rails with 6 huge sliding blocks are applied to the Axis X and Axis Z; in this way, the machining rigidity is greatly improved; therefore, the machine tool is able to cut anything.
Structure introduction of the machine tool body
Four guide rails are applied to this machine; specifically four 45mm guide rails are used on the Axis Y, and 55mm super-wide rails are used on the Axis X and Axis Z, and 6 sliding blocks are also taken;