Nitrogen Generators en Austin, Texas, USA

Especificaciones

Condición
usado
High nitrogen purity
PSA nitrogen generator plants allow production of high-purity nitrogen from air, which membrane systems are unable to provide – up to 99.9995% nitrogen. But in most cases they do not produce more than 98.8% nitrogen with the remainder being argon that is not separated from the nitrogen by the usual PSA process. The argon is not normally a problem, as argon is more inert than nitrogen. This nitrogen purity may also be ensured by cryogenic systems, but they are considerably more complex and justified only by large consumption volumes. The
Less operating costs
By substitution of out-of-date air separation plants nitrogen production savings largely exceed 50%. The net cost of nitrogen produced by nitrogen generators are significantly less than the cost of bottled or liquefied nitrogen.
Environmental impact
Generating nitrogen gas is a sustainable, environmentally friendly and energy efficient approach to providing pure, clean, dry nitrogen gas. Compared to the energy needed for a cryogenic air separation plant and the energy needed to transport the liquid nitrogen from the plant to the facility, generated nitrogen consumes less energy and creates far fewer greenhouse
Food and beverage industries
The moment food or beverages are produced, or fruits and vegetables harvested, an aging process kicks in until the complete decay of the products. This is caused by bacteria and other organisms. Generators are used to flood the products with N2 that takes out the oxygen and prolongs the product lifetime significantly because these organisms cannot develop. Furthermore, chemical degradation of food caused by oxidation can be eliminated or stopped.
Analytical chemistry
Nitrogen generators are required for various forms of Analytical chemistry such as Liquid chromatography–mass spectrometry and Gas Chromatography where a stable and continuous supply of Nitrogen is necessary.
Aircraft & motor vehicle tires
Although air is 78% Nitrogen, most aircraft tires are filled with nitrogen, and there are many tire and automotive shops with nitrogen generators to fill tires, the advantage being that nitrogen in a tank is dry. Nitrogen allows for maintenance of precise and proper tire pressure for longer than regular air, enhancing performance of motor vehicles. Often a compressed air tank will have water in it that comes from atmospheric water vapor condensing in the tank after leaving the air compressor. Nitrogen maintains a more stable pressure when heated and cooled as a result of being dry and doesn’t permeate the tyre as easily due to being a slightly larger molecule (155 pm) than O2 (152 pm).
Chemical and petrochemical industries
The primary and very important application of nitrogen in chemical and petrochemical industries is the provision of inert environment aimed at ensuring general industrial safety during cleaning and protection of process vessels. Besides, nitrogen is used for pipelines pressure testing, chemical agents transportation, and regeneration of used catalysts in technological processes.
Electronics
In electronics, nitrogen serves as an antioxidant in the manufacture of semi-conductors and electric circuits, heat treatment of finished products, as well as in blowing and cleaning.
Fire protection
The fire protection industry uses nitrogen gas for two different applications – fire suppression and corrosion prevention. Nitrogen generators are used in hypoxic air fire prevention systems to produce air with a low oxygen content which will suppress a fire. To prevent corrosion nitrogen generators are used in place of or in conjunction with a compressed air system to provide supervisory nitrogen gas in place of air for dry pipe and pre-action fire sprinkler systems.
Categoría
Bombas en USA
Subcategoría
Pumps & motors
Subcategoría 2
Pumps & motors
ID de Anuncio
54974465

Descripción

Nitrogen generators and stations are stationary or mobile air-to-nitrogen production complexes.
Chemical tankers, gas carriers and reefer ships need clean, dry nitrogen for inerting, purging and cargo padding. Onboard nitrogen generators are the most efficient way to provide this. There are two main types of
nitrogen generators
. One type uses hollow fiber membrane technology and other one is based on the Pressure Swing Absorption (PSA) process. Inert gas generators can produce nitrogen too. Molecular sieves remove the CO2 present in the inert gas.
Adsorption concept of Nitrogen Generators

The adsorption gas separation process in
nitrogen generators
is based on the phenomenon of fixing various gas mixture components by a solid substance called an adsorbent. This phenomenon is brought about by the gas and adsorbent molecules interaction.
PSA Technology

Contactar al vendedor

Fabricante
N/A
Ubicación
🇺🇸 Austin, Texas, USA

¿Le interesa esta máquina?

Este vendedor fue contactado 5 veces durante la semana anterior.

Capacidad de respuesta del vendedor:

4.25