2-story corrugated iron rolling machine - Square wave | Wave circles | Laphong waves en Ho Chi Minh City, Vietnam
Usado
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- usado
- Dimensions (d x r x c)
- 11000 mm x 1800 mm x 1500 mm
- Weight / kg)
- 11500 Kg (Weight may vary according to profile and number of shaft pairs)
- Productivity / speed (m / p)
- 18 22 m/min (Or faster depending on requirements)
- Chassis
- I # 396
- Machine wall (mm)
- 20 mm
- Cutting board
- High-strength Q345 steel 36 mm => 40 mm anti-vibration, curved, ensures the cutter does not warp scratches during use
- Roller diameter (mm)
- Ø70 mm
- Up floor (optional on demand, 2 floors do not overlap)
- - 9 Square waves - 11 Square waves - 13 Laphong waves - 14.5 Round waves
- Downstairs (optional on demand, 2 floors do not overlap)
- - 9 Square waves - 11 Square waves - 13 Laphong waves - 14.5 Round waves
- Electric power (kw / hp)
- 5.5 KW / 7.5 HP
- Thickness (mm)
- - Square wave: 0.25 mm ÷ 0.6 mm Laphong wave: 0.2 mm ÷ 0.5 mm Round waves: 0.25 mm ÷ 0.6 mm
- Corrugated iron (mm)
- 1200 mm
- Resources
- Cold iron, galvanized steel, colored galvanized steel
- Stiffness
- G300 - G550
- Electric motor (hp)
- 7.5 HP Hitachi/Teco - Japan/Taiwan
- Pump head (cm³ / v)
- 31 Cm³ / v
- Valve
- 2 levels of speed
- Cooling (fan)
- AH1012 (100 l/min)
- Oil pipe
- Yokohama/Dynesflex - Japan/Taiwan
- Drive motor (cc / v)
- BMS 400 cc/v
- Pressure gauge (kg / cm²)
- 250 Kg / cm²
- Hydraulic oil r32 (imported)
- 200L
- Cb source
- Fuji - Mitsu
- Relay against motor overload
- Have
- The source board
- 24VDC Omron - Japan
- Industrial controller (plc)
- Mitsubishi - Japan
- Screen
- 7 inches (Weintek - Taiwan)
- Relay shut off hydraulic valve
- 10A load-bearing ultra-durable switching contacts Idec - Japan
- Bo rate control speed
- Are not
- Counter
- 360 pulses/rev Autonics - Korea
- Sirens
- 250VAC
- Lights
- 250VAC
- Wire
- Vietnam
- Flat cutting knife
- Ø80 x 150 ST
- Shape knife
- Ø80 x 150 ST
- Ball bearing
- FBL / PBC
- Chain rs
- 60
- Button
- Super durable dustproof for more than 5 years Idec - Japan
- Cutter
- Japanese / German special steel, knife durable over 5 years. (Use correct maintenance techniques according to the supplier's instructions)
- Rolling batch
- Chromium
- Need electrical cabinets
- paint
- Rolling brace (ø88 - ø112)
- Chromium
- Soup tube (ø76)
- paint
- Ty
- paint
- Yoke
- paint
- Front / rear roller
- Galvanized
- Front mask
- Galvanized
- Chain cover
- Painted steel
- Durability & machine uniformity
- The machine's equipment is manufactured in series from Japanese CNC lathes, milling, grinding, cutting machines and new automatic welding robot, imported 100% new ABB - Switzerland, Yaskawa.
- Safe in use
- The machine is programmed to automatically disconnect the valve when the trip limit switch failure occurs to ensure no mechanical damage or hydraulic seal tank, with emergency buttons both before and after to use. handling.
- Productivity and product quality
- Designing standards across many machines, coordinating with quality standards between machine manufacturers and customers using machines, surveying the reality of the works in use, so there is an optimal solution for each product. The sharp lamination lines do not get scratches, black marks when cold rolled iron like products of other suppliers
- Meet technical standards
- Closely inspecting and evaluating each stage of machine manufacture, always improving quality.
- Design upon request
- This is a standard product (Can be designed when there are specific requirements of customers)
- Categoría
- Procesamiento en Vietnam
- Subcategoría
- Factory plant
- ID de Anuncio
- 52697523
Descripción
1. The roof does not open the joints between the two panels when viewed from the bottom up, top down
2. The machine is machined and assembled accurately to ensure parallelism between the axes and the cutter to ensure no aliasing when roofing
3. Memory stores 10 orders running automatically throughout the process.
4. Error between plates in a setting ± 1 mm.
5. Accumulated error when running from 1m-10m is not more than ±2mm.
6. Self-signaling tail cutting for the last order (Error ± 5 mm).
7. The machine has a large rolling speed and high production efficiency, so users can save more time and still get the desired results.
8. The machine delivers high productivity, producing more products in less time.
9. Saving labor of workers: To make a piece of corrugated iron needs a lot of stages and meticulousness. Therefore, if it depends only on human power, the productivity will be very low. Meanwhile, using a corrugated iron rolling machine, only 1-2 people need to operate the machine, but the product still ensures the quality.
ten.