C-Light rolling machine en Ho Chi Minh City, Vietnam
Usado
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- usado
- Dimensions (d x r x c)
- 3400 mm x 900 mm x 1100 mm
- Weight / kg)
- 1000 Kg
- Productivity / speed (m / p)
- According to product length specification, maximum 60m/min
- Number of shaft pairs
- 10 Pairs
- Roller diameter (mm)
- Ø40 mm;
- Drive motor (reducer motor) (kw/hp)
- 30/40 - New ABB
- Cutter head motor (servo motor) (kw / hp)
- 5.5Kw/7.5Hp
- Oil pump electric motor (kw / hp)
- 1.5Kw/2Hp
- Water pump motor (kw / hp)
- 0.38/0.5Kw/7.5Hp
- Thickness (mm)
- 0.2 mm 0.4 mm (BMT)
- Stiffness
- G350 - G550
- Electric motor (hp)
- (Hitachi / Teco / ABB
- Pump head (cm³ / v)
- 9 Cm³/v
- Valve
- DSG 01
- Oil pipe
- Yokohama / Gpflex / Dynes flex
- Pressure gauge (kg / cm²)
- 250 Kg / cm² (Japan)
- Hydraulic oil r32 (imported)
- 40L
- Cb source
- 19A - Fuji-Mitsu-LG
- Relay against motor overload
- Have
- The source board
- Omron 24VDC
- Industrial controller (plc)
- Mitsubishi - Japan
- Screen
- Weintek - Taiwan
- Relay shut off hydraulic valve
- Super durable contactor with load 10A - Idec - Izumi - Japan
- Bo rate control speed
- Have
- Control cabinet
- Cabinet
- Counter
- Omron / Autonics (360 Pulse / Round)
- Sirens
- 220VAC
- Lights
- 220VAC
- Wire
- Vietnam
- Flat cutting ben
- Not available
- Ben silhouette
- 01 Ben cut the figure 50 x 100 ST
- Ball bearing
- PBC / Net
- Chain rs
- 60, 80
- Button
- Anti-dust and mold super durable over 5 years (Idec - Japan)
- Cutter
- Japanese / German special steel, knife durable over 5 years. (Use correct maintenance techniques according to the supplier's instructions)
- Rolling batch
- Chromium
- Need electrical cabinets
- paint
- Electric cup rotating cupboards
- paint
- V75 instruction desk ke
- paint
- Base v guide
- paint
- Roll down
- paint
- Rolling brace (ø88 - ø112)
- Chromium
- Soup tube (ø76)
- paint
- Ty
- paint
- Yoke
- paint
- Front / rear roller
- Inox
- Chain cover
- Steel
- Durability & machine uniformity
- The machine's equipment is manufactured in series from Japanese CNC lathes, milling, grinding, cutting machines and new automatic welding robot, imported 100% new ABB - Switzerland, Yaskawa.
- Safe in use
- The machine is programmed to automatically disconnect the valve when the trip limit switch failure occurs to ensure no mechanical damage or hydraulic seal tank, with emergency buttons both before and after to use. handling.
- Productivity and product quality
- Designing standards across many machines, coordinating with quality standards between machine manufacturers and customers using machines, surveying the reality of the works in use, so there is an optimal solution for each product. The sharp lamination lines do not get scratches, black marks when cold rolled iron like products of other suppliers
- Meet technical standards
- Closely inspecting and evaluating each stage of machine manufacture, always improving quality.
- Design upon request
- This is a standard product (Can be designed when there are specific requirements of customers)
- Categoría
- Procesamiento en Vietnam
- Subcategoría
- Factory plant
- ID de Anuncio
- 52697372
Descripción
1. Roofing without opening the edges connecting the two panels when viewed from bottom up, top down.
2. The machine is machined and assembled correctly to ensure parallelism between the shafts and the cutter to ensure no jaggies when roofing on the roof.
3. Memory stores 10 orders that run automatically throughout the process.
4. Error between sheets within a setting specification of ± 1 mm.
5. Accumulated error when running from 1m-10m is not more than ± 2mm.
6. Self-signaling of tail-off for the final order (Error ± 5 mm).
7. Store orders that have been run hourly by day for many months (Additional settings charge on demand).
1. Roofing without opening the edges connecting the two panels when viewed from bottom up, top down.
2. The machine is machined and assembled correctly to ensure parallelism between the shafts and the cutter to ensure no jaggies when roofing on the roof.
3. Memory stores 10 orders that run automatically throughout the process.
4. Error between sheets within a setting specification of ± 1 mm.
5. Accumulated error when running from 1m-10m is not more than ± 2mm.
6. Self-signaling of tail-off for the final order (Error ± 5 mm).
7.