IGM AF32 Material feed 400V en Humpolec, Región de Vysočina, República Checa

��� Ideal for small and medium-sized routers, planers or saws.��� 3 rollers with maximum adhesion to the material.��� Feed speeds 5; 6.5; 8 and 11m/min.��� 240W motor with reverse switch.��� Universal stand with a reach of 260mm��� Medium feeder for DIY and craftspeople. Medium-sized material feeder with three spring-loaded rollers that have excellent adhesion and perfectly compensate for unevenness. It is ideal for constant feed when routing or cutting wood and other materials. You can choose from four speeds of the feed, which changes the position of the gears after removing the cover. The reverse is controlled by a manual control. The horizontal and vertical position of the feeder is adjusted on the universal stand using two control screws and is then securely locked. The head of the feeder can be rotated by 90°, so it can be used for horizontal or vertical pressure on the material. It can be mounted directly to the machine with screws (holes must be drilled in the table) or using the IGM Installation plate for the feeder.