Optical Fiber Patch Cords/Mobile Detection Optical Fiber/Spectrum Analysis Optical Fibre en Shanghái, Shanghai, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Type of quartz optical fiber
- HCS/Silicon-silicon
- Diameter of single fiber (gm)
- 200/400/600/800,etc
- Length (m)
- Customize
- Transmission spectrum (nm)
- 200-1100 350-1700 400-2500 Customized
- Numerical aperture (na.)
- 0.22 0.37 Customized
- Transmittance of single fiber
- ＞=90%(632.8nm)
- Transmittance of bundle
- ＞=65%(632.8nm)
- Branch structures
- 1-in-1-Out 1-in-Multiple-Out Multiple-in-1-Out multiple-in-Multiple-Out or other customized structures
- Output form
- Circle/Square/Line or other customize form
- End structure
- SMA905/SMA906/FC/ST and others SMA905/SMA906/FC/ST and other customize structure
- Subcategoría
- Components
- Subcategoría 2
- Optical fiber
- ID de Anuncio
- 103065687
Descripción
General Introduction:
Optical Fiber Patch Cord series covers a wide applying fileds. It refers to that connector plugs are installed at both ends of the optical cable to realize the active connection of the optical path; One end with a plug is called a pigtail. Optical fiber patch cord / cable is similar to coaxial cable, except that there is no mesh shielding layer. The center is a glass core for light propagation. In multimode fiber, the diameter of the core is 50 μ m~65 μ m. The diameter of the single-mode fiber core is 8 μ m~10 μ m. The core is surrounded by a glass envelope with a lower refractive index than the core to keep the optical fiber in the core. On the outside is a thin plastic jacket to protect the envelope.
According to different transmission media, optical fiber patch cords can be divided into common single-mode and multi-mode jumpers of silicon-based optical fiber, as well as other optical fiber jumpers with plastic as transmission media;