Automatic Stacking Machine For Lithium Prismatic Battery Stacking Process en Xiamen, Fujian, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Payment
- L/C, T/T, Western Union, Credit Cards, Paypal
- Product origin
- China
- Shipping port
- Xiamen Port
- Lead time
- 5 Days
- Certificate
- CE, IOS, ROHS, SGS, UL Certificate
- Item
- Acceptance process technical parameters
- Size
- L 3410 x W 17600 x H 1900mm
- Weight
- 3000KG；（Required floor bearing ＞ 450Kg/M2）
- Power
- AC380 50Hz,3 phase, 5 wire system
- Compressed air
- 0.5-0.7MPa(5kgf-7kgf/cm2) Dry, anhydrous；
- Temperature / humidity
- 5-35℃； 10-60%
- Air / dust
- No conductive dust; Salt free gas and corrosive gas;
- Magnetic field and vibration
- There shall be no obvious impact and vibration; There shall be no magnetic field interference affecting the device；
- Machine schematic
- Remarks: the equipment cover adopts aluminum profile + acrylic
- Single chip stacking time (double station)
- 0.5～0.8s/pcs （It varies according to the size of the electrode, and this speed is double station speed)
- Single cell auxiliary time
- ≤12-15S
- Adjacent accuracy of electrode and separator
- Center deviation±0.3mm
- Separator end face alignment accuracy
- ±0.3mm（Except for tail roll separator）
- Alignment accuracy of adjacent electrodes
- ±0.2mm
- Overall alignment accuracy of electrode
- ±0.3mm
- Stacking layers
- It can be set within the thickness range
- Qualified rate
- 99%
- Rate of mobilization
- 98%
- Gluing quantity
- Adjustable quantity (up to 9 layers of glue)
- Battery core w
- 90-200mm
- Battery core t
- 5-30mm
- Exposed tab 1
- ≤40mm
- Tab direction
- Ipsilateral
- When the tab is on the same side，l+l1≤
- 300mm
- Tab spacing
- ≥20mm
- Battery diagram
- Gluing diagram
- Categoría
- Baterías y cargadores en China
- Subcategoría
- Lithium battery machine
- Subcategoría 2
- Battery manufacturing line
- Subcategoría 3
- Prismatic cell manufacturing
- ID de Anuncio
- 100839803
Descripción
Automatic Stacking Machine For Lithium Prismatic Battery Stacking Process
1、Equipment parameters and picture
2、Equipment introduction
2.1Equipment Overview
This equipment is mainly used for the "Z" shaped lamination of prismatic battery.
2.2 workflow
2.2.1 the separator is actively unwinded and introduced into the lamination table through the tension mechanism.
2.2.2 the lamination table drives the separator to move back and forth to place the electrode.
2.2.3 two sets of manipulator suction cups respectively take the negative sheet and the positive sheet after bag making out from the two material boxes on the left, and stack them on the lamination table after mechanical positioning.
2.2.4. The two stations stack the film at the same time. After the lamination is completed, the electric core is successively transferred to the gluing station by the manipulator to realize automatic side gluing; Start the next one at the same time
Automatic lamination of cells.
2.2.
Servicios Ofrecidos por el Vendedor
Este vendedor ofrece piezas de repuesto
Este vendedor ofrece servicios de reparación y mantenimiento
Este vendedor ofrece transporte y logística
Este vendedor ofrece maquinaria nueva
Este vendedor ofrece servicios de consultoría
Este vendedor puede ayudarle a planificar y ejecutar proyectos completos
Este vendedor ofrece montaje y desmontaje in situ