DAV Electronics Stereo Image Parallel Processor en Londres, Inglaterra, Reino Unido
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Número de stock
- DAV-SIPP
- Frequency response
- 10Hz - 50KHz ± 0.25dB
- Inputs & outputs
- All Balanced
- Distortion
- Less than 0.01% Typ, 0.001% 1KHz @ +20dBu o/p
- Clipping level
- +29 dBu
- Noise
- 20 microvolts [-110dB ref +20 dBu. Bandwidth 10Hz-18KHz input loaded 150 ohms, 32dB gain].
- Connectors
- IEC mains, XLRs on rear
- Dimensions
- 19" 1U rack mount. Depth = 150mm
- Gain range
- -5dB - +6 in 1dB steps.
- Categoría
- Audiovisual/Broadcast en Reino Unido
- Subcategoría
- Audio
- Subcategoría 2
- Recording
- Subcategoría 3
- Studio outboard
- Subcategoría 4
- Compressors / limiters
- ID de Anuncio
- 100743286
Descripción
M-S Image Processor and Parallel Insert Mixer
1U rackmount high quality M-S Image Processor & Parallel Insert Mixer.
M-S Image Processor
Using the M-S function you can increase or decrease the stereo width of a track (using the control on the front panel, marked width). Using the insert points, you can EQ/compress/de-ess the sides or middle of a track. As a tool it has endless uses in creating your stereo image when mixing and mastering.
Parallel Insert Mixing (details below)
The SIPP allows the engineer to use outboard processors in "parallel" by allowing any desired mix of wet and dry paths using a continuously variable blend control. The source is fed to a single input and then split into two: The dry path represents the original source which can then be blended with the with the "wet" path which consists of the same source routed to a balanced insert point. The user can connect any piece of outboard, or indeed pieces of outboard to the wet path to achieve a variety of effects.
$750 USD