L-3P phase sequence meter en Pekín, China
Nuevo
Doubleclick to zoom in
Contacte al vendedor
para más fotos y información.
Especificaciones
- Condición
- nuevo
- Power
- 9V battery, continuous use time is about 70 hours.
- Measure mode
- Non-contact clipping method
- Wire position
- The measured wire is in the center of the jaw
- Frequency
- 50Hz/60Hz automatic identification
- Live electricity range
- AC 70-4000V, 45-65Hz (sine wave continuous input), conducted electrostatic detection
- Measuring the highest voltage
- AC 4000V
- Clamp wire size
- Outside diameter ø1.5mm-ø48mm
- Display
- [Positive phase] 4pcs phase detector lights are turned on in a clockwise direction;[Reverse phase] 4pcs phase detection lights are turned on counterclockwise;[Live electricity] L1, L2, L3 lights in the voltage setting range;[Lack of phase] L1 or L2 or L3 lights are not lit;[Open circuit] L1 or L1 or L2 or L3 lights are not lit; [Open circuit] L1 or L2 or L3 lights are not lit.
- Beep
- [Positive phase] The instrument emits intermittent short beep; [Reverse phase] The instrument emits a continuous long beep.
- Battery check
- After the power is turned on, the power indicator is on; the battery is low; the low battery lamp is on.
- Clamp lead length
- 0.6m
- Automatic shut-down
- After about 6 minutes of power on, the meter automatically shuts down to reduce battery consumption.
- Maximum rated power
- 300mVA
- Insulation strength
- 3.7kVrms
- Suitable for safety regulations
- EN61010-1:2001, EN61010-031:2002, pollution grade 2, CAT Ⅲ(600V), Instant overvoltage 6000V.
- Dimensions
- 117.6mm×81mm×25mm (L×W×T)
- Weight (g)
- 260 (with battery)
- Operating temperature
- -15°C to +55°C
- Storage temperature
- -20°C to +65°C
- Relative humidity
- 0% -95% RH
- Subcategoría
- Machinery
- Subcategoría 2
- Electrical test tool
- ID de Anuncio
- 100545513
Descripción
L-3P phase sequence meter is a major breakthrough in traditional phase sequence detection methods. The traditional phase sequence detection must be to open the three-phase wire terminal, the phase sequence meter of the three exposed clips or test pins are connected to the exposed three fire lines.