Usado en Nagano, Japón

PLATE SAMPLE ELECTRODE SME-8310

Dimensiones: 215 mm (8,46 pulgadas) de ancho × 78 mm (3,07 pulgadas) de alto × 165 mm (6,50 pulgadas) de profundidad | Longitud de la punta: 75 cm (2.46 ft)

POWER SOURCE UNIT SM7860

Supported device: Super MΩ HiTester SM7810 Object to which voltage is applied: MLCC (the Multilayer Ceramic Capacitor) | Generation accuracy: Output voltage accuracy: ±2% of set value ± 0.5 V (with no load) Inter...

DISCHARGE DETECTION UPGRADE ST9000

• Fabricante: HIOKI E.E

Funciones de medición: Determinar la descarga | Modelos compatibles: ST4030A

SAFETY TEST DATA MANAGEMENT SOFTWARE 9267

Compatible models: ST5520*, ST5540/ST5541, 3153, 3154, 3156, 3157, 3158, 3159, 3174, 3332, 3333, 3334, and PLCs from various manufacturers (for connection switching) *Control of the ST5520 is subject to certain l...

LEAK CURRENT HiTESTER ST5541

Measurement methods: Measurement of voltage drop across body simulated resistance points, Calculation and display of current values, True rms measurement, Measurement unit floats relative to instrument ground. ...

ELECTRODE FOR SURFACE RESISTANCE SME-8302

Dimensiones: φ 40 mm (1,57 in) × 115 mm (4,53 in) | Longitud de la punta: 1 m (3.28 ft) | Una distancia entre electrodos: 4 mm (0.16 in)

STANDARD RESISTOR SR-2

Voltaje máximo: 1000 V CC | Valor del resistor: de 1 M a 10.000 MΩ en 24 puntos | Dimensiones: 270 mm (10.63 in) An × 90 mm (3.54 in) Alto × 195 mm (7.68 in) Prof.

SURFACE RESISTANCE MEASUREMENT ELECTRODE SME-8301

Dimensiones: φ 60mm (2.36in) × 50mm (1.97in) | Longitud de la punta: 1m (3.28ft)

DMM STATION MR8990+MR8741/MR8740

Measurement functions: Install into Memory HiCorder MR8740/8741 for use; 2 channels of DC voltage measurement | Measurement ranges (20 div. f.s.): 100 mV range (5 mV/div.): -120.0000 mV to 120.0000mV, 0.1 μV reso...

DIGITAL MULTIMETER DT4281

Dc voltage range: 60.000 mV to 1000.0 V, 6 ranges, Basic accuracy: ±0.025 % rdg. ±2 dgt. | Ac voltage(*1) range: 60.000 mV to 1000.0 V, 6 ranges, Frequency characteristics: 20 Hz - 100 kHz Basic accuracy 45 - 65 ...

DIGITAL MULTIMETER DT4282

Dc voltage range: 60.000 mV to 1000.0 V, 6 ranges, Basic accuracy: ±0.025 % rdg. ±2 dgt. | Ac voltage(*1) range: 60.000 mV to 1000.0 V, 6 ranges, Frequency characteristics: 20 Hz - 100 kHz Basic accuracy 45 - 65 ...

IMPULSE WINDING TESTER ST4030A

• Fabricante: HIOKI E.E

Measurement items: • Quantification (LC value, RC value) of the response waveform obtained when impulse voltage is applied, pass / fail judgment • Waveform judgment using AREA value, Flutter, Laplacian etc. • Equ...

AUTOMATIC INSULATION / WITHSTANDING HiTESTER 3153

Functions: Program up to 32 files of 50 step test settings. 10 sets each of dielectric strength and insulation test settings, hold, buzzer | Monitor functions: Output voltage, detected current, measured resistanc...

INSULATION TESTER ST5520

• Fabricante: HIOKI E.E

Measurement items: Insulation resistance (Applied DC voltage method) | Testing voltage: (Measurement range: AUTO/MANUAL setting is possible) 25 V ≤ V < 100 V (2.000/20.00/200.0 MΩ), 100 V ≤ V < 500 V (2.000/20.0...

SHIELDING BOX SME-8350

Dimensiones: 250 mm (9.84 in) de ancho × 100 mm (3.94 in) de alto × 200 mm (7.87 in) de profundidad | Longitud de la punta: 80 cm (2.62 ft)