Usado en Nagano, Japón

LCR METER IM3536

Measurement modes: LCR (Measurement with single condition), Continuous testing (Continuous measurement under saved conditions) | Measurement parameters: Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls,...

SMD TEST FIXTURE IM9100

Measurement terminals: Four terminal direct connection type, BNC terminals | Connecting section: Four terminal type | Measurable sample sizes: Metric (Inch): 0402 (01005), 0603 (0201), 1005 (0402) | Allowable inp...

C HiTESTER 3504

Measurement parameters: C (capacitance), D (loss coefficient tan δ) | Measurement range: C: 0.9400 pF to 20.0000 mF, D: 0.00001 to 1.99999 | Basic accuracy: (Typ.) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016 | Measur...

HEAT FLOW LOGGER LR8432

Specialized functions for heat flow measurement: - Easy scaling settings: directly enter the sensitivity of the heat flow sensor - Calculations: waveform processing function for the analysis of temperature and he...

COMMUNICATION ADAPTER LR5091

• Fabricante: HIOKI E.E

Function: • Settings: Communicates via infrared light with LR5000 series loggers to send and receive settings. • Graph function: Displays graphs of up to 16 channels, displays statistical data, etc. • Print funct...

IMPEDANCE ANALYZER IM3570

Measurement modes: LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode | Measurement parameters: Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs,...

LCR METER IM3533

Measurement modes: LCR (Measurement with single condition), Transformer testing (N, M, ΔL), Continuous testing(Continuous measurement under saved conditions) (LCR mode) | Measurement parameters: Z, Y, θ, X, G, B...

C METER 3506-10

Measurement parameters: C (Capacitance), D (loss coefficient, tan δ), Q (1/tan δ) | Measurement range: C: 0.001 fF to 15.0000 μF, D: 0.00001 to 1.99999, Q: 0.0 to 19999.9 | Basic accuracy: (Typ.) C: ±0.14 % rdg.,...

IMPEDANCE ANALYZER IM7585

Measurement modes: LCR mode, Analyzer mode (sweeps with measurement frequency and measurement level), Continuous measurement mode | Measurement parameters: Z, Y, θ, Rs (ESR), Rp, X, G, B, Cs, Cp, Ls, Lp, D (tanδ...

IMPEDANCE ANALYZER IM7583

Measurement modes: LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode | Measurement parameters: Z, Y, θ, Rs (ESR), Rp, X, G, B, Cs, Cp, Ls, Lp, D (tanδ...

FlexPro

Productos hioki compatibles: MR6000, MR6000-01, MR8827, MR8740, MR8741, MR8847 (MR8847-01, MR8847-02, MR8847-03), MR8847A (MR8847-51, MR8847-52, MR8847-53), MR8875, LR8450, LR8432, LR8431, LR8410, LR8400, 8423, e...

DIFFERENTIAL PROBE P9000

• Fabricante: HIOKI E.E

Measurement functions: Waveform monitor output only Frequency characteristics: DC to 100 kHz, -3 dB | Division ratio: 1000:1 or 100:1 (user selectable) | Dc amplitude accuracy: ±0.5% f.s. (f.s. = 1.0 V; voltage d...

LOGIC PROBE 9320-01

• Fabricante: HIOKI E.E

Function: Detection of voltage signal or relay contact signal for High/Low state recording | Input: 4 channels (common ground between unit and channels), digital/contact input, switchable (contact input can detec...

LOGIC PROBE MR9321-01

Function: Detection of AC or DC relay drive signal for High/Low state recording Can also be used for power line interruption detection | Input: 4 channels (isolated between unit and channels), HIGH/LOW range swit...

LOGIC PROBE 9327

• Fabricante: HIOKI E.E

Function: Detection of voltage signal or relay contact signal for High/Low state recording | Input: 4 channels (common ground between unit and channels), digital/contact input, switchable (contact input can detec...